Distribution Connectors (Combined)

Deadends Bolted Straight Line Strain Clamp Ferrous

ALUMINUM MDE

DA-15

For deadending static wires.

May be used to deadend copper or Copperweld ® phase conductors. Magnetic induction heating will occur.

Material:

Body and Keeper – Galvanized Ductile Iron Hardware – Galvanized Steel Sockets and Clevises – Ductile Iron, Galvanized Cotter Pin – #302 Stainless Steel

Product Data

U-BOLTS

DIMENSIONS INCHES (MM)

ULTIMATE BODY STRENGTH LBS. (KN)

APPROX. WT. EACH LBS. (KG)

CATALOG NUMBER

CLAMPING RANGE INCHES (MM)

SIZE INCHES (MM)

NO.

L

W A X B

0.16” - 0.40” (4.06 - 10.16)

5,000 (22.24)

1/2” (12.70)

6-3/16" (157.16)

13/16" (20.6)

7/8" x 1-1/4" (22.2 x 31.8)

2.1 (0.95)

MDE40N

1

6,000 (26.69)

3/8” (9.53)

7-1/2" (190.5)

3/4” (19.05)

7/8" x 1-1/4" (22.2 x 31.8)

2.5 (1.13)

0.18” - 0.46” (4.57 - 11.68)

2

MDE46N

8,000 (35.59)

1/2” (12.70)

8-15/16" (227.01)

3/4” (19.05)

7/8" x 1-1/4" (22.2 x 31.8)

3.8 (1.72)

0.36” - 0.60” (9.14 - 15.24)

2

MDE60N

10,000 (44.48) 10,000 (44.48) 10,000 (44.48)

1/2” (12.70) 1/2” (12.70) 5/8” (15.88)

9-1/4" (234.95) 11” (279.40) 12.5” (317.50)

3/4” (19.05) 3/4” (19.05) 3/4” (19.05)

1” x 1-7/16” (25.4 x 36.5) 1” x 1-13/16” (25.4 x 46.0) 1-1/16" x 2-1/8" (27.0 x 54.0)

3.8 (1.72) 5.5 (2.49) 7.9 (3.58)

0.46” - 0.86” (11.68 - 21.84) 0.65” - 1.25” (16.51 - 31.75) 0.86” - 1.55” (21.84 - 39.37)

2

876722000

2

876822000

2

876922000

NOTES:

(1) Lifting eye is standard on MDE type clamps. (2) 87600 series without lifting eye.

Rated slip strength as a percentage of conductor RBS varies with conductor type, size and stranding. Minimum slip strength rating on standard strength conductors is 40% RBS (Partial Tension per ANSI C119.4). Consult factory for slip strength test data on specific clamp and conductor combinations. Add Suffix “C” for Clevis Fitting (Type CA) Add Suffix “S” for Socket Eye Fitting (Type SA) Copperweld ® is a registered trademark of Fushi Copperweld Inc.

800.346.3062 | hubbellpowersystems.com |