Distribution Connectors (Combined)

Deadends Bolted Straight Line Spring-Loaded – Side Opening Ferrous

DUCTILE IRON MDSO

DA-16

For deadending static wires.

May be used to deadend copper or Copperweld ® phase conductors. Magnetic induction heating will occur.

Material:

Body and Keeper – Galvanized Ductile Iron Hardware – Galvanized Steel Sockets and Clevises – Ductile Iron, Galvanized Cotter Pin – #302 Stainless Steel

Product Data

U-BOLTS

ULTIMATE BODY STRENGTH (LBS)

DIMENSIONS INCHES (MM)

CLAMPING RANGE INCHES (MM)

CATALOG NUMBER

NO.

SIZE

A

B

C

D

BODY SAG EYE

0.19” - 0.47” (4.83 - 11.94) 0.25” - 0.57” (6.35 - 14.48) 0.31” - 0.70” (7.87 - 17.78)

8.53” (216.66) 8.94” (227.08) 9.54” (242.32)

0.94” (23.88) 1.02” (25.91) 1.03” (26.16)

4.27” (108.46) 4.27” (108.46) 6.33” (160.78)

1.32” (33.53) 1.42” (36.07) 1.5” (38.10)

3/8” (9.53) 3/8” (9.53) 3/8” (9.53)

8000

6000

MDSO47N

2

8000

6000

MDSO57N

2

9000

6000

MDSO70N

2

NOTES: Rated slip strength as a percentage of conductor RBS varies with conductor type, size and stranding. Minimum slip strength rating on standard strength conductors is 40% RBS (Partial Tension per ANSI C119.4). Consult factory for slip strength test data on specific clamp and conductor combinations. Copperweld ® is a registered trademark of Fushi Copperweld Inc.

| hubbellpowersystems.com | 800.346.3062