Bonding and Grounding - Communication (CA12005E)

IntersystEM-Bonding

METER BOX GROUND CLAMP FOR INTERSYSTEM-BONDING WITH TOP-TIGHTENING SPADE WEDGE CONTACT POINT, THREE GROUND WIRE CONNECTION POINTS Description

Meter box bonding and grounding connector for intersystEM-bonding

Application

Bonding and grounding telco and CATV to power ground.

Features

• Stainless steel and copper alloy construction to reduce corrosion • Applies with a standard terminal wrench/nut runner—no special tools • Gel-filled cap helps prevent corrosion at the piercing points • Easy, foolproof installation • Mounts on the side—does not interfere with the cover or collapse the sides. • Accommodates #6–#14 AWG solid or stranded ground wire • Makes electrical contact under the dripcap of the box, on bare, unpainted metal. • Available with an extra-long body, to accommodate meter boxes with an extended lip on the top cover • An intersystEM-bonding termination for connecting intersystEM-bonding and grounding connectors required for other systems shall be provided external to enclosures at the service equipment and at the disconnecting means for any additional buildings or structures. • The intersystEM-bonding termination device shall not interfere with opening a service or metering equipment enclosure. • The intersystEM-bonding termination shall have the capacity for connection of not less than three intersystEM-bonding conductors. NEC ® Section 250.94 Requirements

C

US

LISTED 84D8

Ordering information

EM-MB5-3 – Meter Box Ground Clamp

Add suffix -NP for alternate caps (not gel-filled) to cover the prongs and bottom. Add suffix -XL for extra-long body. Add suffix -H for narrow wedge. Add suffix -F for flat points (top and bottom).

BONDING &

GROUNDING

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G90 | August 2022