Bonding and Grounding - Communication (CA12005E)

Meter Box Clamps

METER BOX CLAMPS WITH TOP-TIGHTENING SPADE WEDGE CONTACT POINT Description

C

US

LISTED 84D8

Meter box bonding and grounding connector

Application

Bonding and grounding telco and CATV to power ground.

Features

Gel-filled cap

• Stainless steel and copper alloy construction to reduce corrosion • Applies with a standard terminal wrench/nut runner— no special tools • Gel-filled cap helps prevent corrosion at the piercing points. • Easy, foolproof installation • Mounts on the side—does not interfere with the cover or collapse the sides. • Small and inconspicuous • Accommodates #6–#14 AWG solid or stranded ground wire • Makes electrical contact under the dripcap of the box, on bare, unpainted metal • Available with an extra long body, to accommodate EM-MB5-NP

EM-MB5

meter boxes with an extended lip on the top cover

EM-MB5-XL

Ordering information

EM-MB5 – Meter Box Clamp with top tightening spade wedge contact point and gel-filled cap EM-MB5-NP – Meter Box Clamp with top-tightening spade wedge contact point and alternate caps (not gel-filled) to cover the prongs and bottom EM-MB5-H-F – Meter Box Clamp with top-tightening narrow spade wedge contact point and flat top and bottom (no need for caps)

GROUNDING

BONDING &

Add suffix -XL for extra-long body.

EM-MB5-H-F

For more meter box clamps, see the IntersystEM-Bonding Terminal section, starting on page G94.

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G89 | August 2022