Wiring Device-Kellems Full Product Catalog

Underfloor Duct Products Underfloor Duct Junction Box Dimensions Ordering Information Note: Floor Duct part numbers are for reference only. All Floor Duct orders are lot billed with a generic FD prefix project specific part numbers. Please contact your local Hubbell Territory Manager for all Hubbell Duct quotations.

Junction Box Catalog Number 201-JB-x 201-JB-x-RCx 201W-JB-x 201W-JB-x-RCx 202-JB-x 202-JB-x-RCx SP202-JB-x SP202-JB-x-RCx 202W-JB-x 202W-JB-x-RCx

End-To-End Of Duct

Overall Base Plate

Cover Plate

6 5 /

16 "

8"

10 ½"

12 9 /

1 /

13 /

16 "

14

2 "

17

16 "

203-JB-x 203-JB-x-RCx 203F-JB-x 203F-JB-x-RCx 204-JB-x 204-JB-x-RCx 202-JB-x-HD-ADJ SP202-JB-x-HD-ADJ 202W-JB-x-HD-ADJ

19 5 /

11 /

17"

8 "

22

16 "

Equals Preset Height + 1 7/8"

Cover Plate End-to-End of Duct Overall Base Plate

1/4" Concrete over top of Preset Insert

Preset Insert

15 1 / 8 "

18 ½"

14"

Duct

18 1 / 8 "

21 ½"

17"

Underfloor Duct Raceway Aftersets and Marker Caps Flush Insert Duct

Description

Catalog Number DAIFA-1G-15 DAIFA-1G-2 DAIFA-1G-3 DAIFA-2G-15 DAIFA-2G-2 DAIFA-2G-3 DAIFA-3G-15 DAIFA-3G-2 DAIFA-3G-3

1 1/2" Insert Height

1-Gang

2" Insert Height 3" Insert Height

1 1/2" Insert Height

Provides means to add activation inserts in the field where needed prior to concrete pour. 14 gauge steel.

2-Gang

2" Insert Height 3" Insert Height

Afterset Insert

1 1/2" Insert Height

3-Gang

2" Insert Height 3" Insert Height

Insert Marker Cap: Zinc Screw

Marker caps are used in place of standard insert caps in (a) each insert adjacent to junction box, (b) inserts on each side of a permanent wall, and (c) the last insert in each run of duct.

FA-DMC-Z FA-DMC-B

Marker Cap

Brass Screw

Used for abandoning preset opening (one per gang). 18 gauge steel. Customer is required to fill void over top of plate with concrete.

FA-MC

Blank Cover

Compart

ment Cover

Round Insert Duct (Reducing Bushings Provided By Others)

Description

Catalog Number

DAI-2 DAI-3 DAI-4

2 " Insert Height

Provides means to add activation inserts in the field where needed prior to or after concrete pour. Zinc die cast.

3 " Insert Height

4 " Insert Height

Afterset Insert

Insert Marker Cap: Zinc Screw

Marker caps are used in place of standard insert caps in (a) each insert adjacent to junction box, (b) inserts on each side of a permanent wall, and (c) the last insert in each run of duct.

DMC-Z DMC-B

Marker Cap

Brass Screw

Wiring Device-Kellems ®

www.hubbell.com/wiringdevice-kellems/en

T-15