Wiring Device-Kellems Full Product Catalog

Pin and Sleeve Devices/Mechanical Interlocks

Typical Specifications Manufacturer’s Identification Hubbell HBL460MIFS2W Description

Performance Electrical Dielectric Voltage

Fused Insulgrip ® Pin and Sleeve Mechanical Interlock

Withstands 3,000VAC Min.

Max. Working Voltage 250VDC/600VAC. Current Interrupting

Electrical Type

3 Pole + Earth

Certified for current interrupting at full rated current and voltage. Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes at the voltage rating of receptacle. Mechanical 10,000 cycles minimum.

Rating

60A, 250VDC/600VAC

Configuration Per UL 1686 C1 Enclosure Type (UL 50E) Indoor & Outdoor - 4X (Watertight, Washdown) Indoor - 12 (Dust Tight, Falling Dirt) Ingress Protection IP66 Suitability Certification UL Listed for US and Canada Note: This device provides fused switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected or the door from opening while the receptacle is energized. The switch cannot be turned on until the plug is fully inserted.

Short Circuit

Withstand Rating

Operations

Mechanical Impact Resistance

In accordance with UL 746C. Terminal Identification In accordance with UL, CSA and international conventions. Product Ratings

Ratings are part of the external label and molded into the receptacle housing.

Mounting

External adjustable feet.

Materials Part

Environmental Moisture Resistance

Material

Indoor & Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling dirt).

Base, Door and Handle

PBT

Conduit Hub

Zinc, 30A – 1 in., 60A – 1¼ in. NPT

Ingress Protection

IP66 Suitability.

Enclosure Gasket

Neoprene

Flammability

UL94-5VA and V-0 Classification.

and Shaft Seal Shaft and Mounting Inserts Brass Ground Plate

Operating Temperatures Max. Continuous +60°C;

Min. Continuous -40°C w/o impact. All exposed insulating materials are UV stabilized.

Galvanized Steel Stainless Steel

UV Resistance

Enclosure Screws and Hinge Spring Hinge Pin Contact Carrier

Fuse Types

UL Listed Class “J”. CSA Certified HRCI-J.

Nickel-Plated Brass Thermoset Polyester

Horsepower Ratings 30A Horsepower Ratings

60A Horsepower Ratings

3 Phase A.C. 200-240V

Standard

Maximum*

3 Phase A.C. 200-240V

Standard

Maximum*

3 5

7.5 15 20

7.5 15 15

15 30 50

480V 600V

480V 600V

7.5

Note: *Requires time delay fuses.

Dimensions

10.18" (258.6)

7.27" (184.7)

9.31" (236.5)

1.51" (38.4) 30A 1.68" (42.7) 60A

7.19" (182.6)

3.60" (91.4)

11.46" (291.6)

12.37" (314.2)

15.03" (381.8)

14.48" (367.8)

15.36" (390.1)

4.00" (101.6) 30A 5.00" (127.0) 60A

8.43" (214.1)

Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.

Dimensions in Inches (mm)

G-48

Wiring Device-Kellems ®

www.hubbell.com/wiringdevice-kellems/en