Wiring Device-Kellems Full Product Catalog

Energy Efficiency Solutions

New Codes and Standards mandates that 50% of all receptacles in private offices, open offices and computer classrooms must be automatically controlled by occupancy or time based schedules. This also includes outlets in modular furniture. Hubbell provides solutions for compliance that are cost effective and installer friendly. Find out more design resources at www.hubbell-wiring.com/energy.aspx Wired Utilizing low voltage wiring provides installers with a familiar method of wiring and installation. Specify Hubbell’s new load control receptacle to meet this requirement. Utilize alternating outlet or split receptacle wiring as required to control at least 50% of the outlets in the space.

Existing Lighting Control System

Lighting Control Unit

24V DC Status Signal

Always ON Circuit

Controlled Circuit

Hot Neutral Ground

Receptacle Controller

Split Circuit Pre � marked “Controlled” Receptacles

Codes and Standards

ASHRAE Standard 90.1 2019 Standard 90.1 requires that at least 50 percent of all 125V, 15A and 20A receptacles in private offices, open offices and classrooms be controlled by an automatic control device. Controlled receptacles need to be marked to differentiate them from non-controlled receptacles.

California Title 24 Building Energy Efficiency Standards 2019 Section 130.5(d) of California Energy Commission Title 24, Part 6 - 2019 code requires receptacles to have automatic shutoff controls in certain spaces in all buildings.

2020 National Electrical Code ® NEC ® Section 406.3(E) requires that all nonlocking, 125 V, 15A and 20A receptacles controlled by an automatic control device or by an automatic energy management system must be marked with the symbol and the word “CONTROLLED”.

Clear Connect ® is a registered trademark of Lutron Electronics Co., Inc.

Wiring Device-Kellems ®

www.hubbell.com/wiringdevice-kellems/en

E-12