Hot Box Enclosures (CA07145E)

Anchor Installation & Specification Single and Double Anchor Kit: „ Used on Sectionalized Aluminum, Modular Aluminum, Dura Fold®, Designer Series™ and F/G Flip-Top Enclosures.

Note: Anchor type and quantity will vary depending on the type of the enclosure.

Technical information: „ Ultimate strength of wedge anchor: Pull out: 2,300lbs - Shear: 2,400lbs. Installation: 1. Locate the Anchors. Mark and drill 3/8” diameter holes x 1 3/4” - 2” deep with the supplied bit.

2. Drive the anchor into the hole, place the anchor pad over the anchor and tighten the washer and nut.

EZ Anchor Kit: „ Used on Fiberglass EZ Box® & Hot Rok® and AEZ.75 Aluminum Enclosures"

Installation: 1. Locate the brackets. Mark and drill 5/32” diameter holes x 3” deep with the supplied bit. 2. Attach the brackets with the supplied concrete screws. Screws will be hidden under the flange of the enclosure.

Hubbell Utility Solutions


Made with FlippingBook - Online catalogs