Cast Iron Pole Line Hardware (05A_castiron)

Cast Iron Pole Line Hardware (05A_castiron)

®

®

5A

5A

POWER SYSTEMS, INC.

CAST IRON POLE LINE HARDWARE

Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workmanship. Buyer must notify the Company promptly of any claim under this warranty.The Buyer’s exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company’s option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY’S PRODUCTS OR ANY SALE OR USE THEREOF.The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer.The Company’s warranty shall run only to the first Buyer of a product from the Company, from the Company’s distributor, or from an original equipment manufacturer reselling the Company’s product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer.This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product. Warranty - Application Hubbell Power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study.This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge.

Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell Power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study.

Minimum order quantities may apply. Contact factory for test information.

© Copyright 2006 Hubbell  •  210 North Allen Street  •  Centralia, MO 65240 NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.

Printed in USA

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

RGS 15M

®

®

5A

POWER SYSTEMS, INC.

AUXILIARY EYES

Adds additional guy attachment to existing anchor rod.Also can be used as a pulling eye for guying tension.

Approx. Ship Wt. Lbs. Per 100 Pcs. 270

Catalog No. BB155A

Anchor Rod Diameter 5 / 8 " - 1"

Maximum Strand Size 1 / 2 "

Thimble Diameter 1 1 / 2 "

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153; U-Bolts .5" diameter

1.50" 1.94"

2.38"

Slotted hole design to allow thru-bolt to be inserted from eye side. Not threaded. BOLT EYELETS

.56"

2.50"

1.25"

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No. † B14A

Mounting Bolt Diameter

Maximum Strand Size

5 / 8 " 3 / 4 " 5 / 8 " 3 / 4 "

— —

100 100 137 137

4.25"

B14B B12A B12B

5 / 8 " 5 / 8 "

B12

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 Contact factory for round bolt hole design. † RUS Listed

2.38"

.56"

.56"

1.25"

Series CB - Bonding clamps are specified for connecting ground wires to guys, messengers, or static wires. BONDING CLAMPS

3.00"

Approx. Ship Wt. Lbs. Per 100 Pcs.

Cable Range

B14

Catalog No.

Main 9 / 16 " - 1 / 4 " 250 MCM - 4 STR

Tap

CB1

2 STR - 6 SOL

38

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

CB1

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

®

®

5A

POWER SYSTEMS, INC.

BRACKET, ANGLE CROSSARM

Mounts post insulators at 30° angle on crossarm for use on running corners.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Stud Bolt Diameter

Catalog No.

Crossarm Size 3 3 / 4 " x 4 3 / 4 " Max. and Round Crossarms

Mtg. Bolt Diameter

3 / 4 "

1XAB

3 / 4 "

610

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

Designed to fit NEMA “L” brackets. One bolt mounts bracket to pole. BRACKET, CUTOUT AND ARRESTER

Approx. Ship. Wt. Lbs. Per 100 Pcs.

Catalog No. ICB1 ICB10

"A" Dimensions 7 5 / 8 " 12"

Mtg. Bolt Diameter

Equip. Bolt Diameter

5 / 8 " 5 / 8 "

3 / 8 " 3 / 8 "

147 262

A

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

11 ⁄ 16 " DIA.

6 1 ⁄ 4 "

4 7 ⁄ 8 "

3 ⁄ 8 " x 1 3 ⁄ 4 " CARRIAGE BOLT TWO PROVIDED

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

®

®

5A

BRACKET, POLE TOP INSULATOR

POWER SYSTEMS, INC.

Mounts post or pin type insulator to top of pole. Variety of bolt hole locations for mounting to pole.

Dis. From Insul.Base To Top Hole

Approx. Ship.Wt.Lbs. Per 100 Pcs.

3 3 ⁄ 4 "

Catalog No.

Mounting Bolt Dia.

Insulator Bolt Dia. 5 / 8 " or 3 / 4 " 5 / 8 " or 3 / 4 " 5 / 8 " or 3 / 4 "

Mtg. Bolt Spacing 4 3 / 4 "

 IB2  IB3 †IB4

5 / 8 " 3 / 4 " 5 / 8 "

360 600 600

4 3 / 4 " 6 3 / 8 " 5"

5" or 8" 5" or 8"

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 † RUS Listed

6 3 ⁄ 8 "

3 3 ⁄ 4 "

4 1 ⁄ 2 "

5"

4 3 ⁄ 4 "

2"

11 ⁄ 16 "

13 ⁄ 16 "

15 3 ⁄ 8 "

11 ⁄ 16 "

10 5 ⁄ 8 "

14"

5"

6"

8"

1 3 ⁄ 16 "

2 3 ⁄ 16 "

11 ⁄

"

16

2 1 ⁄ 2 "

2 1 ⁄ 2 "

1 5 ⁄ 16 "

IB2

1 3 ⁄ 16 "

3"

IB3

3"

IB4

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

®

®

5A

BRACKET, HORIZONTAL INSULATOR Use for mounting one or two insulator(s) to pole for armless construction. Approx. Ship. Wt.Lbs. Per 100 Pcs. 333 1025 Space Between Insul. Bases — 14" Insul. Angle Dim. 5° — Mtg. Bolt Spacing 5", 6" 4", 5" Max. Insul. Bolt Dia. 3 / 4 " 3 / 4 " Mtg. Bolt Dia. Two 5 / 8 " Two 5 / 8 " Catalog No. 1IPTB 2IPTB Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

POWER SYSTEMS, INC.

1IPTB

2IPTB

BRACKET, VERTICAL INSULATOR Use for mounting pin or post vertical insulators, cutouts, arresters, or cable terminators. Three-hole style can be used for in-line deadending using suspension insulators.

Max. Equip. Mtg.

Max. Insul. Mtg.

Clearance Pole To Insul. Bolt

Approx. Ship. Wt.Lbs. Per 100 Pcs. 860

1 1 /

"

Pole Mtg. Bolt Spacing

Pole Mtg. Bolt Dia.

LB18B3/LB18B3CH "A"

4

Bolt Dia.

Catalog No.

Bolt Dia.

"A" 12" 18" 18" 12" 18"

3 / 4 " 3 / 4 " 3 / 4 " 3 / 4 " 3 / 4 " LB12A1 LB18B1 LB18B3 *T2060594 **LB18B3CH Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 * T2060594 has 3 captive 1/2" x 2" bolts and nuts included **LB18B3CH has 2 captive 1/2" x 2" bolts and nuts included with LB18B3. Two 5 / 8 " Two 5 / 8 " Two 5 / 8 " Two 5 / 8 " Two 5 / 8 " 5 / 8 " 5 / 8 " 5 / 8 " 1 / 2 " 5 / 8 " 5" 5" 5" 5" 5" 1300 1400 86 1400

4"

4"

4"

11 ⁄ 16 " Dia. Hole

13 ⁄ 16 " Dia.

For 3 ⁄ 8 " Carriage Bolt

4 1 ⁄ 2 "

4 1 ⁄ 2 "

LB12A1 & LB18B1

4" R

11 ⁄ 16 " Dia.

4"

"A"

T2060594

"A"

Side view with hardware

4"

5"

4"

T2060594

.58 sq. Hole

4"

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

®

®

5A

POWER SYSTEMS, INC.

CLAMP, AERIAL SUSPENSION

ASC2

Rigid keeper for maximum clamping action. Bottom groove is curved to prevent damage to messenger. Top hook to sup port cable during installation.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Messenger Range .22" - .56" .43" - .75"

Pole Clearance

Mounting Bolt Dia.

ASC2 ASC3

1 1 / 2 " 1 1 / 2 "

5 / 8 " 5 / 8 "

175 175

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

CLAMP, AERIAL SUSPENSION

ASC5

Heavy duty clamp design uses two bolts to hold messenger to clamp, which prevents clamp slippage if pole shrinks.

Mtg. Bolt Dia. 5 / 8 "

Approx. Ship Wt. Lbs. Per 100 Pcs. 725

Catalog No. ASC5

Pole Clear. 3"

Messenger Range 9 / 16 " - 3 / 4 "

Ground Wire 6 AWG

Clamp Bolt Dia. Two- 5 / 8 "Sq.Hd.

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

CLAMP, U-BOLT GUY Can be easily installed without disassembling the clamp. The GCU38C and GCU50C have a spacer block to help prevent damage to strand against U-bolt. Approx. Ship Wt. Lbs. Per 100 Pcs. 80 Type of Nut HEX U- Bolt Dia. 3 / 8 " Catalog No. GCU38 Strand Size 3 / 16 " - 3 / 8 " Clamp Bodies and Spacer: Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

GCU38

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

®

®

5A

Bolts installed in opposite directions to allow greater wrench clearance. CLAMP, TWO-BOLT GUY

POWER SYSTEMS, INC.

Holding Power lbs.

Slip Less Than Dia.of Strand

Slip Less Than 1 1 / 2 "

Guy Strand Size

Approx. ShipWt. Lbs. Per 100 Pcs.

No. Slip

Clamp Lngth.

Catalog No.

Two Clamps

5 / 16 "

1 1 / 8 "

GC131

7,300

7,700

9,600

66

10,700 Wire Broke 13,100

3 / 8 "

1 3 / 16 "

GC138

7,200

9,150

12,150

90

GC SERIES

Clamp Bodies: Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

The L14 is a one-piece extension link with a clevis pin and cotter key. EXTENSION LINK

Approx. Ship Wt. Lbs. Per 100 Pcs. 200

Catalog No. L14

Pin Diameter 5 / 8 "

L - Inches 14

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

L14

7 ⁄ 8 " 1 3 ⁄ 8 "

5 ⁄ 8 " Clevis Pin

L

11 ⁄ 16 " Dia. (Typ)

1 1 ⁄ 2 " Dia. (Typ)

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

®

®

5A

Crossarm Grid Gain

POWER SYSTEMS, INC.

Curved face with spurs prevents need of cutting gain into pole. Slotted hole for easy alignment.

Dimensions In Inches Max. Bolt Dia. "D"

Approx. Ship Wt. Lbs. Per 100 Pcs. 80

A

Catalog No. PG31 PG441 PG45 PG45S PG3545

Pole Dia. Range

Crossarm Range 3 1 / 2 " - 5 1 / 2 " 3 1 / 2 " - 5 1 / 2 " 5" - 7" 5" - 7" 4 1 / 2 "

A 3 4 4 4 3 1 / 2

B 4 4 5 5 / 16

3 / 4 3 / 4 3 / 4 3 / 4 5 / 8

6" - 10" 6" - 11" 6" - 11" 6" - 11" 4" - 9"

130 180 180 120

D

5 1 / 4 4 1 / 2

B

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 Catalog numbers with "S" suffix have extended bolt hole slot.

Flat Back Crossarm Gain Curved face with spurs prevents need of cutting gain into pole. Large surface area reduces crossarm shift.

R

Dimensions In Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No. PG4

Max. Bolt Dia. "D"

Pole Dia. Range "R"

A 4 4 4 5 3 / 8

B 5 1 / 2 5 1 / 2 4 7 1 / 4

D

3 / 4 7 / 8 7 / 8 7 / 8

6" - 11" 6" - 11" 6" - 11" 10" - 16"

180 175 120 375

PG4A †PG44 PG5

B

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 † RUS Listed

A

GAIN, SHELF Provides strong, stable crossarm connection to the pole. Reduces need for braces. Deadending or guying located directly under arm. Steel crossarm can be mounted to shelf with bolts.

D

4"

E

Mtg. & Bolt "D" No. & Dia.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Dimensions In Inches

Crossarm Range

Catalog No.

A

B

C

E

A

11 / 16 Dia. Hole

Two - 5 / 8 "

3 5 / 8

3 1 / 2 " x 6 1 / 2 "

PG84XB12

540

8

6

C 10"

13 / 16 Dia. Hole

Two - 3 / 4 " Max.

9 3 / 4

4 7 / 16

PG84XE12

950

4 " Channel

8

Clamp Bodies: Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

B

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

®

®

5A

GUY HOOK Use in down or span guy applications. Spurs resist down slotting. The overturning action is resisted by the wide lower curved heal pad. Contact Factory about Guy Hooks for use on concrete and steel poles.

POWER SYSTEMS, INC.

1 5 ⁄ 8

"

3 5 ⁄ 8

"

GH6

Max. Guy Strand Dia.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Thru-Bolt Dia.

Lag Screw Dia. None 1 / 2 " None 1 / 2 " None 1 / 2 " or 3 / 4 " None

GH151A † GH5 GH5ILS GH6 GH6ILS GH6X GH6XBILS

5 / 8 " 5 / 8 " 5 / 8 " 3 / 4 " 3 / 4 " 7 / 8 " 1"

7 / 16 " 7 / 16 " 7 / 16 "

62 88 98 88 98

13 ⁄ 16

"

2 5 ⁄ 8

"

4 15 ⁄ 16

"

1 / 2 " 1 / 2 " 5 / 8 " 5 / 8 "

1 1 ⁄ 2

"

240 225

2 1 ⁄ 2

"

9 ⁄ 16

"

Suffix "ILS" indicates cast in integral lag Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153 † RUS Listed

2 3 ⁄ 4

"

1 5 ⁄ 8

"

3 ⁄ 8

"

3 3 ⁄ 4

"

11 ⁄ 16 " dia.

4 1 ⁄ 2

"

2 5 ⁄ 8

"

2 7 ⁄ 16

"

GH151A

GH5ILS

1 1 ⁄ 2

"

2 3 ⁄ 8

"

2"

GUY HOOK, SPAN TYPE For guy attachment, use at angles 0 o to 30 o from horizontal.

GH2

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Max. Guy Strand Dia.

Max. Thru-Bolt Dia. 5 / 8 " 3 / 4 "

GH2 GH3

1 / 2 " 1 / 2 "

66 64

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

PIN, ANGLE

PS8779

The crossarm corner pin is made of ductile iron, hot dip galvanized. Made with 1" lead threads for 1" thread insula tors at an angle 60 o from horizontal. Attached to the cros sarm by means of a square head bolt, which is furnished as part of the pin.

Bolt 5 ⁄ 8

" x 7"

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.  PS8779  PBA841

Crossarm Size

Pin Height Above Arm 5" 8 1 / 4 "

Bolt Size

Thread Size

5 / 8 " x 7" 5 / 8 " x 7" 4" 4" Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

1" 1"

315 541

4 1 ⁄ 2

"

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

®

®

5A-10

3 1 ⁄ 4

"

POWER SYSTEMS, INC.

GEP5: 11 ⁄ 16 GEP5A: 13 ⁄ 16

" Dia. " Dia.

2 5 ⁄ 8

"

4 1 ⁄ 2

"

2 5 ⁄ 8

"

11 ⁄ 16

" Dia.

11 ⁄ 16

" Dia.

GEP5

1 1 ⁄ 4 2 3 ⁄ 8

"

"

PLATE, POLE EYE Allows guy loop to be made up on the ground as well as providing a clevis eye plate capability. Spurs prevent slip page down the pole. Contact Factory about eye plates for use on concrete and steel poles.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No. GEP5 GEP5A

Mounting Bolt Dia.

Max. Pin Diameter

Max. Strand Size

5 / 8 " 3 / 4 "

5 / 8 " 5 / 8 "

5 / 8 " 5 / 8 "

175 175

1 7 ⁄ 8 "

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

4"

PLATE, POLE EYE

5 1 ⁄ 4 "

Narrow profile eye plate provides clevis eye with 5 / 8 " maxi mum pin diameter.

21 ⁄ 32 "

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No. GEP5C GEP5D GEP5E GEP5G

Mounting Bolt Diameter

Max. Pin Diameter

Lag Screw Diameter 1 / 2 " Integral Spur

5 / 8 " 3 / 4 " 3 / 4 " 3 / 4 "

5 / 8 " 5 / 8 " 5 / 8 " 5 / 8 "

155 155 155 155

1 3 ⁄ 4 "

1 / 2 " 3 / 4 "

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

13 ⁄ 16 " DIA.

PLATE, POLE EYE GEP6 style eye plate provides large pad area to spread forces over pole surface. Ideal for guy strain insulator installation.

6 5 ⁄ 8 "

4"

Approx. Ship Wt. Lbs. Per 100 Pcs. 269

Catalog No. GEP6

Mounting Bolt Diameter 3 / 4 "

Maximum Pin Diameter 3 / 4 "

1"

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

4 1 ⁄ 8 "

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

®

®

5A-11

Top curved groove has 3 / 8 " radius to allow guy at tachment. Groove captures guyattachment against pole to help prevent possibility of guy slipping off hook. Also has pole eye lug. PLATE, POLE EYE

POWER SYSTEMS, INC.

8 3 ⁄ 8 "

A

1 3 ⁄ 4 "

"A"

3 7 ⁄ 8 "

2"

"A"

4 1 ⁄ 4 "

"A" Mtg. Bolts No.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Max. Pin Dia.

2 3 ⁄ 8 "

2 1 ⁄ 2 "

6 7 ⁄ 16 "

& Dia. Two 1"

6"

559 564 332

GEP7 GEP7A GEP12

7 / 8 " 7 / 8 " 3 / 4 "

13 ⁄ 16 " Dia.

1 3 ⁄ 8 " R

Two 7 / 8 " One 7 / 8 "

3 13 ⁄ 16 "

1 7 ⁄ 8 "

1 1 ⁄ 4 "

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

GEP12

GEP7

POLE BRACE For use inpushpole applicationwhere guying isnot feasible. Brace adjusts for different pole angles.

Approx. Ship Wt. Lbs. Per 100 Pcs. 750

Catalog No. SG611

Pole Diam eter 6" - 11"

Base Diameter 4" x 8"

Mounting Bolt Dia. 3 / 4 "

Hinge Bolt Dia. 3 / 4 "

4"

8"

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

THIMBLE CLEVIS, GUYWIRE

Commonly used for attaching guy to pole eye plate. Clevis pin has humped cotter key.

Approx. Ship Wt. Lbs. Per 100 Pcs.

"E"

"D"

Dimensions In Inches

Catalog No.

A 4 9 / 16 5 5 / 16

B 1 3 / 4 2 1 / 2

C 3 3 / 4 4 5 / 16

D 1 7 / 16 1 3 / 4

E 3 / 4 1

F 5 / 8 3 / 4

100 275

"B"

TC1 TC2

"F" Dia. Clevis Pin

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

"A" "C"

TC2

Clearance for 3 / 4 " Sq. Hd. Bolt

"B"

TWIN ARM SPACER Connects two crossarms in twin arm application. Lugs provide for deadending attachment.

4 1 ⁄ 2 "

CXS

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Mtg. Bolt Hole "A"

Clevis Bolt Hole "B"

For Cross- Arm Sizes

"A"

CXS1

11 / 16 "

11 / 16 "

3 1 / 4 " x 4 1 / 4 " & 4" x 5"

440

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

2 1 ⁄ 2 "

9 7 ⁄ 8 "

HUBBELL / CHANCE – CENTRALIA, MISSOURI

MAY 2006

®

®

5A-12

POWER SYSTEMS, INC.

Cast washers provide excellent strength characteristics. Reinforcing ribs helps prevent washer from crushing. WASHERS, CAST

C U R V E D S Q U A R E

Max. Bolt Dia. Inches

Thickness At Boss Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

Size Inches *2 1 / 4 x 2 1 / 4

Catalog No.

GCW1 †GCW31 GCW31A †GCW41 GCW41A

5 / 8 5 / 8 3 / 4 3 / 4 7 / 8

1 / 4 3 / 8 3 / 8 1 / 2 17 / 32

20 45 45

*3 x 3 *3 x 3 *4 x 4  4 x 4

GCW

100 100

† RUS Listed * NEMA Standard

C U R V E D R E C T A N G U L A R

GCW31

Max. Bolt Dia. Inches

Thickness At Boss Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

Size Inches *2 1 / 4 x 3 1 / 2

Catalog No. CRW3 †CRW4A CRW4B

3 / 4 7 / 8 1

3 / 8 1 / 2 1 / 2

45 93 93

*3 x 4  3 x 4

† RUS Listed * NEMA Standard

R O U N D F L A T

Approx. Ship Wt. Lbs. Per 100 Pcs.

Max. Bolt Dia. Inches

Thickness At Boss Inches 7 / 16

Size Inches *3 Dia. *4 Dia.  4 Dia.

Catalog No.

GWR

44 87 87

GWR3 GWR4 GWR4A

3 / 4 7 / 8 1

1 / 2 1 / 2

* NEMA Standard

S Q U A R E F L A T

Max. Bolt Dia. Inches

Thickness At Boss Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

BB

Size Inches

Catalog No.

*2 1 / 4 x 2 1 / 4 *2 1 / 4 x 2 1 / 4

†BB214 BB214A

5 / 8 3 / 4

9 / 32 9 / 32

20 20

† RUS Listed * NEMA Standard

MAY 2006

HUBBELL / CHANCE – CENTRALIA, MISSOURI

Made with FlippingBook Online newsletter