CA07074E_Above Ground Enclosures

Hubbell Sectionalizing Cabinets and Primary Pedestal Installation Instructions

Hubbell Sectionalizing Cabinets and Primary Pedestals are easy to install by following these simple instructions:

1. Excavate hole, make area 1-2 feet longer and approximately 6 inches deeper than the suggested burial height of the cabinet or pedestal being installed. 2. Compact soil and place gravel in the base to a depth of approximately 6 – 8 inches. 3. Using a sling, lift and position the cabinet or pedestal in place, then lower the product into place to the recommended burial depth. Check elevation, level and make any necessary adjustments. 4. Place backfill around the cabinet or pedestal using normal utility practices for backfilling. If mechanical compaction is used, install internal bracing prior to prevent deflection or premature failure.

800.346.3062 | hubbellpowersystems.com | 137