Versa-Tech Reclosers Catalog (CA10192E)

Battery replacement Battery power is used for the following functions only: • To close the recloser after installation or lockout. • To power the communication radio module if load current is less than 6A (VTXC) / 10A (VTLT, VTI, and VTII). • To flash the beacon after lockout. The batteries are made of a very stable lithium chemistry that is designed for a shelf life of 10 years. Hubbell Power Systems recommends that users replace the batteries on a 6 to 8 year cycle. The battery bayonet is designed to be replaced using a shotgun hot stick while the recloser is in service. The battery bayonet utilizes a twist lock design. It is easily removed by pushing in slightly and turning.

Battery bayonet in the recloser

Versa-Tech® Battery Bayonet (PSC8620064)

Battery Pack Replacement Kit The option to replace the Lithium battery pack inside Versa-Tech battery bayonet is available. Order Part No. PSC8620397

Battery bayonet partially removed from recloser

Serial Port Cover

Versa-Tech® Battery Tester The Versa-Tech Battery Tester was designed to for use with the Versa-Tech® I, Versa-Tech® LT, and Versa-Tech® II, and Versa-Tech® XC

Versa-Tech® Nameplate Bracket INCLUDED WITH EACH UNIT - This bracket slides onto the bottom of the recloser allowing ample space to affix the included VT Recloser product type identification sticker. Contact your local Hubbell representative or customer service if a replacement is needed.

Recloser Battery Bayonet. Order Part No. PSC8620482

Versa-Tech® Battery Tester

Non-Reclose Hookstick Adapter Kit INCLUDED WITH EACH VERSA- TECH RECLOSER This adapter can be attached to the NR lever to allow for easier operation with a hookstick. Order Part No. PSC8620253

Versa-Tech® with Nameplate Bracket

Page 6 | Dec 2018