Underground Hardware (CA12001E)
Underground Cable Racking
T-Section Type
• Vertical pinning of successive racks is permitted by an offset at each rack end. • Racks are made of 2¼" x 2¼" x ¼" steel T-section. • Hot dip galvanized. • Mounting holes and slot for fastening to manhole walls are designed to be used with or without insulators. • Hooks supplied with 3 / 8 " x 1½" cotter bolt and key, also available with plastisol coatings applied after galvanizing.
Hook No 1231
racking
Hook No 1232
Cable Racks
Hook No 1233
Dimensions Inches
Catalog Number
Number of Hook Holes
Approx Ship Wt lb Per Each
Hook Hole Spacing
Overall Length
Mounting Hole Spacing
PS1225
14
11/2
271/2
251/2
8.40
Cable Rack Insulator (White Glaze)
Dimensions in Inches
Rack No PS1225
Catalog Number
Approx Ship Wt lb Per Each
Radius for Cable R
Length Along Hook A Width
1121 1118
25/8 11/2
33/4
33/4 33/4
1.38 1.12
3 3 / 4
”
3
Cable Rack Hooks
2 3 / 4
”
Catalog Number
Dimensions Inches
ANSI Load Rating lb
A
Approx Ship Wt lb Per Each
Extension from Rack Face
Steel Size Gauge
Galvanized Plastisol Coated
R
2 1 / 4
”
1231 1232 1233
C2030084 C2030085 C2030086
6
9 7 7
400 200 200
1.64
101/2
3.08/3.40 5.50/6.20
15
Insulator No 1121
Page 5 | August 2013
Made with FlippingBook - Online catalogs