Turner Substation Catalog (CA10103E )

Hinge Terminal Pad The pivot point for the pad is directly over the insulator. This provides a strong load bearing feature, limiting bending of the pad. The terminal pad threads are silver plated and sealed with an o-ring once screwed into the hinge casting.

Current Carrying Components The TCV2 Aluminum switch has both aluminum and silver plated copper alloy live parts. Exposed current transfer points are silver-to-silver.

Switch Adjustment Four leveling screws are provided on the sub-base of each insulator stack to facilitate easy alignment after assembling the insulators on the switch. Adjusting the screws raises or lowers the end of the switch blade.

Accessories Operating Mechanism complete with any of the following: • Swing Handle (standard) • Worm Gear (25:1) • Motor Operator TECO-Rupter (see pages 29 to 32) • Full Load Break • Loop Split • Line Charging

Arcing Horns (standard) Quick Break Whips Pole Mounted Galvanized Steel Platforms Pipe Mounted Rod Insulators Outriggers and Wire Guides Vertical Operating Shaft Auxiliary Switches Ground (Earth) Switches

Page 24

618.797.5000 | TURNER ELECTRIC | turnerswitch.com | January 2016