Turner Substation Catalog (CA10103E )

770SpiritofSt. LouisBlvd | Chesterfield,MO63005

Bearings The main pivot bearing assembly consists of two tapered roller bearings, which are adjusted and factory lubricated. They require no further attention for the life of the switch. These bearings are protected with a permanent o-ring seal and plug. Leveling Leveling screws are provided on the moveable and stationary insulator mounting flange to facilitate easy alignment of the insulator stacks. Adjusting the moveable mount leveling screws raises or lowers the end of the switch blade allowing simple, correct blade to jaw contact interface

Blade Position Indicator Utilities need to know when a switch is closed correctly. As an optional feature, Turner developed a new blade position indicator. The indicator is fully integrated in the True Turn Technology and provides positive visual confirmation that the blade contacts are securely locked in the jaw contacts. Accessories Operating Mechanism complete with any of the following: • Swing Handle (standard) • Worm Gear (25:1) • Motor Operator TECO-Rupter (see pages 28 to 31) • Full Load Break • Loop Split • Line Charging Arcing Horns (standard) Quick Break Whips Pole Mounted Galvanized Steel Platforms

Pipe Mounted Rod Insulators Outriggers and Wire Guides Vertical Operating Shaft Auxiliary Switches Ground (Earth) Switches

Page 12

618.797.5000 | TURNER ELECTRIC | turnerswitch.com | January 2016