Transmission Tools (2250)

STRAIN LINK STICK

Max. Work Load, lb. 3500 3500 3500 3500 3500 3500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500

Jaw Opening

Approx. Wt., lb.

Pole Dia. and Length 1 1 / 4 " x  4' 1 1 / 4 " x  6' 1 1 / 4 " x  8' 1 1 / 4 " x 10' 1 1 / 4 " x 12' 1 1 / 4 " x 14' 1 1 / 2 " x  2' 1 1 / 2 " x  4' 1 1 / 2 " x  6' 1 1 / 2 " x  8' 1 1 / 2 " x 10' 1 1 / 2 " x 12' 1 1 / 2 " x  4' 1 1 / 2 " x  6' 1 1 / 2 " x  4' 1 1 / 2 " x  6' 1 1 / 2 " x  8' 1 1 / 2 " x 10' 1 1 / 2 " x 12'

Transmi ss ion Tool s – 2250 • Supported from above by rope blocks, which are operated in unison with rope blocks attached to the wire tong • Also used to support middle conductor on H-frame structures during insulator or crossarm changes • Heat-treated aluminum alloy hooks and ferrules for best high-strength/lightweight ratio • High-quality-steel butt rings for attaching rope blocks or handlines Features & Applications • Tested per OSHA & ASTM F711 • Used as insulation between rope blocks and a hot line wire grip • For deadend structures and running corners • Attached to conductor close to wire tong to support conductor loads

Overall Length

Catalog No. H47152 C4000814 C4000815 C4000816 C4000817 C4000818

Min.  .22  .22  .22  .22  .22  .22  .44  .44  .44  .44  .44  .44  .72  .72 1.00 1.00 1.00 1.00 1.00

Max.  .75  .75  .75  .75  .75  .75 1.06 1.06 1.06 1.06 1.06 1.06 1.50 1.50 2.50 2.50 2.50 2.50 2.50

 3 3 /  5 1 /

4 /1.7 kg.

 4'9"  7'3"  9'3" 11'3" 13'3" 15'3"  3'3"  4'9"  6'9"  8'9" 10'9" 12'9"  5'0"  7'2"  5'2"  7'2"  9'2" 11'2" 13'2"

4 /2.4 kg.  6 /2.7 kg.  6 3 / 4 /3.1 kg.  7 1 / 2 /3.4 kg.  8 1 / 4 /3.7 kg.  4 3 / 4 /2.2 kg.  5 3 / 4 /2.6 kg.  6 3 / 4 /3.1 kg.  7 3 / 4 /3.6 kg.  8 3 / 4 /4.0 kg.  9 3 / 4 /4.4 kg.  9 7 / 8 /4.5 kg. 11 7 / 8 /5.4 kg. 11 1 / 8 /5.1 kg. 13 /5.9 kg. 15 /6.8 kg. 17 /7.7 kg. 19 /8.6 kg.

H47161 H47162 H47163 H47164 H47165 H47166 H4717 H47171 H4718 H47181 H47182 H47183 H47184

• Butt swivel spins freely on ball-thrust bearing • Jaw edges are rounded to prevent scarring of conductors

SPIRAL LINK STICK

Features & Applications • Tested per OSHA & ASTM F711 • Replaces strain link stick when lineman cannot safely install one by hand • A lifting eye on the head ferrule enables the lineman to guide the Spiral Link Stick to the conductor with a hotstick • 1-1/4" Epoxiglas® pole • Heat-treated aluminum alloy ferrule castings • Galvanized-steel spiral hook and butt ring

Max. Work Load, lb. 3500 3500

Pole Dia. and Length

Maximum Conductor Size

Approx. Wt., lb.

Catalog No.

Overall Length 31" 57 1 / 2 "

H4722 C4000812

1 1 /

4 " x  15.5"

1510.5 kcmil ACSR 1510.5 kcmil ACSR

 3 1 /  4 1 /

2 /1.6 kg. 2 /2.0 kg.

1 1 /

4 " x  42"

ROLLER LINK STICK

Features & Applications • Tested per OSHA & ASTM F711 • For spreading and holding conductors at midspan when relocating poles • Applied to conductor at pole and pulled to position by hand line on butt ring • Handline should be secured by a temporarily installed screw anchor or other fixed object • Also used for measuring conductor-to-ground clearance by attaching measuring tape or length of rope to butt ring

• 1-1/4” pole • Rotating the pole closes the hook, leaving head free to roll along the conductor

Max. Work Load, lb. 1000 1000

Pole Dia. and Length 1 1 / 4 " x  4' 1 1 / 4 " x  6'

Maximum Conductor Size

Approx. Wt., lb.

Catalog No.

Overall Length

H47144 H47146

58" 82"

605 kcmil ACSR 605 kcmil ACSR

 3 3 /  4 1 /

4 /1.7 kg. 4 /1.9 kg.

March 2020 Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com

Page 2252