Transmission Products (T-1201)

Suspension Clamps— Aluminum Angle Clamp For standard voltage angle construction with all aluminum, ACSR, or aluminum alloy conductor. Designed for use in turning angles up to 70 ° (including sag and turn angle).

SUSPENSION CLAMPS

ALUMINUM HAC

Material: Body and Keeper – aluminum alloy Hardware – galvanized steel

Socket and Clevis – galvanized ductile iron Cotter Pin – stainless steel

7 / 8

”

5 / 8

”

W

PD

H

2 1 / 2

”

2 1 / 16

”

15° Min 35° Max

J

Socket Type SA

Clevis Type CA

L

Fitting

Dimensions Inches (mm)

Approx Wt Each lb (kg) 3.6 (1.63) 5.0 (2.27) 5.3 (2.40) 4.0 (1.81) 5.7 (2.59) 5.8 (2.63) 4.8 (2.18) 6.6 (3.02) 6.8 (3.08) 5.6 (2.54) 7.4 (3.36) 7.6 (3.45) 6.0 (2.72) 7.9 (3.58) 8.0 (3.63)

Catalog Number

Clamping Range Inches (mm)

Ultimate Body Strength lb (kN)

Type

Cat No

L

W H

J

PD

35,000 (156) 30,000 (133) 25,000 (111) 35,000 (156) 30,000 (133) 25,000 (111) 40,000 (178) 30,000 (133) 25,000 (111) 40,000 (178) 30,000 (133) 25,000 (111) 40,000 (178) 30,000 (133) 25,000 (111)

HAC118N HAC118S HAS118C HAC147N HAC147S HAC147C HAC182N HAC182S HAC182C HAC204N HAC204S HAC204C HAC213N HAC213S HAC213C

None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis

— SA10 CA101

1.00-1.18 (25.40-29.97)

97/8 (250.83)

19/32 (32.54)

23/4 (69.85)

1/2 (12.70)

5/8 (15.88)

— SA13 CA13

1.25-1.47 (31.75-37.34)

93/4 (247.65)

111/16 (42.86)

31/4 (82.55)

1/2 (12.70)

5/8 (15.88)

— SA1613 CA1613 — SA1613 CA1613 — SA1613 CA1613

1.55-1.82 (39.37-46.23)

101/8 (257.18)

21/32 (51.59)

31/2 (88.90)

1/2 (12.70)

3/4 (19.05)

111/4 (285.75)

211/64 (55.17)

31/2 (88.90)

1/2 (12.70)

3/4 (19.05)

1.73-2.04 (43.94-51.82)

1.81-2.13 (45.97-54.10)

111/4 (285.75)

21/4 (57.15)

33/4 (95.25)

5/8 (15.88)

3/4 (19.05)

NOTE: Recommended torque on U-bolts: 1” — 480 in-lb; 5/8 ” — 720 in-lb. Bolt and nut may be substituted for clevis pin by adding suffix “BNK” to catalog number.

Page 147 | July 2016