Transmission Products (T-1201)

Tee Connectors

Product Data and Conductor Size ( continued )

Conductor Range (1)

Length Before

Run or Tap Code

Minimum Press Size Tons

Net Weight lb (kg)

Die Size

Outside Diameter Inches (mm)

AAC Size Kcmil

Run Inches (mm)

Tap Inches (mm)

ACSR Size Kcmil (Str)

1351.5, 1400, 1431, 1500, 1510.5

1192.5 (54/19), 1272 (45/7) (54/19), 1351.5 (45/7) (54/19) 1431 (45/7) (54/19), 1510.5 (45/7) (54/19), 1590 (45/7)

1.331 - 1.425 (33.9 - 36.2)

15CD 36AH

15

21.5 (546)

7.7 (197)

60

4.70 (2.14)

16CD 38AH

1.426 - 1.520

1590, 1600, 1700

16

21.3 (541)

8.2 (210)

60

5.30 (2.41)

17CD 40AH 19CD 44AH 19CD

1.521 - 1.615

1750, 1800, 1900

1590 (54/19), 1780

17

22.6 (575)

8.8 (223)

60

6.30 (2.86)

JUMPER TERMINALS

2000, 2250, 2300 2034.5 (72/7), 2057 (76/19) 2167 (72/7) — 2156 (84/19), 2312 (76/19)

1.630 - 1.805

19

25.3 (643)

9.8 (249)

100

8.90 (4.04)

NOTE: Standard Hex dies not available for some sleeve and conductor combinations. If no AH die listed for conductor, use only the CD die shown. Install with Fargo ® type UJC or, for lowest resistance connection, type HTJC inhibitor compound. Tees are suitable for EHV applications on conductors larger than 1.0 in O.D. Example: ORT221211 would be the catalog number for a ACSR 795 (26/7) Run with an ACSR 636 (24/7) Tap. (1) These tee taps also approved application on AAAC and ACAR conductors within the diameter ranges listed.

Page 136 | July 2016