Transmission Products (T-1201)

Splices— Compression

Product Data and Conductor Size ( continued )

Length Before Compression Inches

Component Catalog Number

ACSR Conductor (1)

Die Size (3)

Full Tension Splice Assembly Catalog Number

Jumper Loop Splice (2)

Strand AL / STL

Aluminum Body 10157SSAC

Steel Sleeve

Full Tension

Loop Splice

Code Word Kcmil

Alum Steel

SPLICES

TJA5718SSAC TJA6028SSAC TJA6210SSAC TJA6328SSAC TJA6610SSAC

Lapwing

1590.0 1780.5 2057.0 2156.0 2312.0

45/7

11506 11569 11438 11516 11438

40157SSAC 40167SSAC 40167SSAC 40184SSAC 40184SSAC

47.0 48.8 48.8 50.7 52.0

35.4 37.5 37.5 39.1 40.8

40AH 16SH 42AH 18SH 42AH 16SH 44AH 18SH 44AH 18SH

Chukar

84/19 10167SSAC 76/19 10167SSAC 84/19 10184SSAC 76/19 10184SSAC

Roadrunner

Bluebird Thrasher

NOTE: Splices are EHV rated where conductor is 1.0 in (25.4 mm) O.D. or larger. Joint compound: Fittings are ACSS-rated when installed with Fargo ® HTJC16 joint compound — see table below for number of 16 oz tubes required for deadend body and terminal components. (1) TJA splice assemblies are full-tension rated for ACSS conductors with standard high-strength (HS) and extra high-strength (EHS/UHS) steel cores. (2) Loop splice is minimum tension connector (no steel sleeve component required). (3) Compression press minimum size: 20AH and smaller — 12 ton 24AH through 40AH — 60 ton 42AH and larger — 100 ton

Fargo Type HTJC16 Joint Compound Required (Cartridges Per Fitting)

Die Size 76AH 20AH 24AH 27AH 30AH 34AH 36AH 38AH 40AH 42AH 44AH

Catalog Series

Component

FT Splice Body

10 40

0.10 0.06

0.20 0.08

0.32 0.10

0.44 0.13

0.60 0.20

0.94 0.26

0.98 0.30

1.10 0.35

1.10 0.40

1.40 0.54

1.52 0.68

Loop Splice

Page 120 | July 2016

Made with FlippingBook - Online magazine maker