Tools - Communication (CA12006E)

First page Table of contents Previous page 63 Next page Last page

Lineman-Grade Gloves

General Reference Ratings and Labels • Insulating gloves should be used by properly trained personnel. • Must comply with employer’s work procedures and applicable standards for every voltage rating and application. • Table below summarizes Chance ® Rubber Insulating Gloves ratings and labels per ASTM.

To those who climb ™ Selecting the right size for you

Max Use Voltage AC/DC

Proof Test Voltage AC/DC

Class

Label Color

• Selecting the right size ensures a comfortable wear without sacrificing dexterity. • Allow approximately

00 Gloves Only

500 / 750

2,500 / 10,000

Beige

an additional 0.5” if liners will be used.

1,000 / 1,500

5,000 / 20,000

Red

We’re taking responsibility • Gloves are manufactured using environmentally conscious processes that make the most efficient use of raw materials and natural resources. • When workers wear our gloves, they are also helping limit VOC and CO2 emissions.

7,500 / 11,250

10,000 / 40,000

lineman's accessories

White

17,000 / 25,500

20,000 / 50,000

Yellow

26,500 / 39,750

30,000 / 60,000

Green

36,000 / 54,000

40,000 / 70,000

Orange

Clearance for Leather Protectors Per ASTM F496

Leather Protector Considerations • Protector must meet ASTM specification F696 • Protector should always be worn over Rubber Insulating Gloves. • This prevents mechanical damage to the Rubber Insulating Gloves, except for those conditions detailed in ASTM F496. • Protector must be properly sized and shaped to avoid deformation or damage. • Minimum distances between gauntlet and cuff are listed in the table shown. For more details on leather protectors or rubber gloves, please refer to ASTM D120, F496 and F696.

Minimum Distance Between Protectors and Rubber Gloves Inches (mm)

This isanAdobe® Illustrator®File thatwas savedwithoutPDFContent. ToPlaceoropen this le inother applications, it shouldbe re-saved from Adobe Illustratorwith the "CreatePDF CompatibleFile"option turnedon.This option is in the IllustratorNativeFormat Optionsdialogbox,whichappearswhen savinganAdobe Illustrator leusing the SaveAscommand. applications, it shouldbe re-saved from Adobe Illustratorwith the "CreatePDF CompatibleFile"option turnedon.This option is in the IllustratorNativeFormat Optionsdialogbox,whichappearswhen savinganAdobe Illustrator leusing the SaveAscommand. This isanAdobe® Illustrator®File thatwas savedwithoutPDFContent. ToPlaceoropen this le inother This isanAdobe® Illustrator®File thatwas savedwithoutPDFContent. ToPlaceoropen this le inother applications, it shouldbe re-saved from Adobe Illustratorwith the "CreatePDF CompatibleFile"option turnedon.This option is in the IllustratorNativeFormat Optionsdialogbox,whichappearswhen savinganAdobe Illustrator leusing the SaveAscommand. applications, it shouldbe re-saved from Adobe Illustratorwith the "CreatePDF CompatibleFile"option turnedon.This option is in the IllustratorNativeFormat Optionsdialogbox,whichappearswhen savinganAdobe Illustrator leusing the SaveAscommand. This isanAdobe® Illustrator®File thatwas savedwithoutPDFContent. ToPlaceoropen this le inother

Glove Class

00, 0

1/2 (12.7)

1 (25.4)

2 (50.8)

3 (76.2)

4 (101.6)

Page 57 | August 2013

Made with FlippingBook flipbook maker