Protecta*Lite Arresters (35) (CA01130E)

Selecting Protecta*Lite®

Step 4: Select Hardware Hubbell Protecta*Lite arresters can use a wide variety of hardware. Tap or suspension clamps are common components in each assembly. The use of either clamp is largely user dependent, but each one has advantages. Tap clamps are commonly used to facilitate installing line arresters with the system energized, however they do cover a limited conductor range based on applicable system voltages. Suspension clamps are more versatile, but typically cannot be installed with a hot line tool. These clamps are also more rigid and can be viewed as a more permanent option. Hubbell has been using a wide variety of suspension and tap clamps on Protecta*Lite arresters for over 30 years.

Tap Clamps

Catalog Number

Description

Conductor Range - Inches (mm)

GH201D

Bronze hot line tap clamp

0.128 (3.25) - 0.414 (10.5)

GH201DP

Bronze hot line tap clamp, tin plated

GH202AD

Aluminum hot line tap clamp

0.522 (13.2) - 1.028 (26.1)

Page 20 | June 2020