Powerohm Products
TYPE ERB EDGEWOUND: Type ERB bar-mounted edgewounds are availablewith the sameelectrical ratings as theTypeERedgewounds. All unitshave thesameapproximatediameter of 2 inches. Unitsare furnished with a through-bar and terminal hardware. Type ERB Coil Dimensions & Tap Options TYPE ERB (BAR-MOUNT) EDGEWOUND DIMENSIONS
STANDARDCOILDIMENSIONS
LENGTH
A
B
7-7/8
2
9-1/4
FRONTVIEW
SIDEVIEW
10-7/8
3
12-1/4
3/8 DIA.
13-7/8
4
15-1/4
(2) 17/32 SLOTS
16-7/8
5
18-1/4
3
1-1/4
19-7/8
6
21-1/4
B A
22-7/8
7
24-1/4
ADDITIONAL TAPS
Type ER resistors are furnished with two stainless steel terminals at either end of the ceramic core. Additional fixed taps consist of a stainless steel terminal welded in place at various intervals. Numerous tap configurations are available, but limited to a spacing no closer than 1-1/4 inches.
SPECIFY PART NUMBERS AS FOLLOWS:
-
For example, the part number of a Type ER, 50 amp, 0.51 ohm coil with 2 taps at 1/3 spacing is ER5-50-2C. See below for additional part number examples.
Part Number
Number of Taps Spacing (See Table)
Other examples of ER Edgewound Resistors with additional taps.
ADDITIONAL TAPS&SPACINGCHART FRACTIONAL SPACING SUFFIX LETTER
1/2 1/3 1/4 1/5 1/6 1/7 1/8 1/9
B C D E F G H J K L M N P R S T
ER3-50-1D (1 TAP@ 1/4 SPACING)
1/10 1/11 1/12 1/13 1/14 1/15 1/16 1/17
(5 TAP@ 1/6 SPACING) ER3-50-5F
Made with FlippingBook Ebook Creator