Pole Line Hardware Supplements (5-53Supp1-19)

SUPPLEMENTAL CATALOG BULLETIN 5-53.3 NOVEMBER 2007

Pins, Crossarm

Nylon Threads • Eliminate handling and disposal concerns associated with Lead threads. • Nylon threads by Hubbell Power Systems meet all ANSI performance and dimensional requirements. • Insulator fit is firm, yet resilient. • Nylon threads are more impact resistant than on pins with Lead threads.

Clamp-Type Steel Pins – For Wood or Composite Crossarms 1" and 1 3 / 8 " ANSI Standard Nylon Threads Galvanized per ASTM A-153 Clamp type crossarm pins (saddle pins) can be used for straight line, angle or corner construc tion. The clamping design does not require cutting or drilling of the crossarm. The back plate has raised projections to prevent slippage. Each pin is shipped with hardware assembled as shown.

Dimensions

RUS Load Rating at 10 degree Deflection 1500 lbs. 1500 lbs.

Approx. Ship Wt. per 100 pcs. 5.61 lbs. 6.46 lbs.

Catalog Number

A

B

C

E

ANSI Thread Size

Crossarm Size

Carriage Bolts 5 / 8 " x 7" 5 / 8 " x 7"

Shaft Height

14322P † 143221P †

5 3 / 4 "

3 3 / 4 " x 4 3 / 4 " 3 3 / 4 " x 4 3 / 4 "

1"

1 3 / 8 "

7"

† RUS Listed, Category f (approval pending)

A

1 3 / 8 " Nylon Thread

A

1" Nylon Thread

B

B

5 / 8 " x 7" Carriage Bolt

5 / 8 " x 7" Carriage Bolt

Hardware includes Square Nut and M-F Locknut

Hardware includes Square Nut and M-F Locknut

14322P

143221P

® NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2007 Hubbell Incorporated                           Printed in USA ®

POWER SYSTEMS, INC.