Pole Line Hardware (5)

5-17

BRACKETS, TRANSFORMER MOUNTING BANDED CLUSTER MOUNTS Fits most 3 KVA to 500 KVA transformers

to mounting bracket, ground clamp and installation instructions are included. The Banded Cluster Mounts may be ordered in pack ages (recommended), or by components (not recom mended). Brackets provide 6 3 / 8 " of pole clearance. Heavy Duty Bracket

These easy-to-install cluster mounts have a curved back to fit round, tapered poles from 6" (15.2 cm) to 10 1 / 2 " (26.7 cm) in diameter. Manufactured of high-strength steel, galvanized per ASTMA-153. Standard duty mounts have one set of four 6" long clamping bolts. Heavy-duty mounts have two sets of bolts (see sketch). Lag screws can be used to position the mounting bracket be fore tightening clamping bolts. Support rating, however, does not depend on the use of lag screws. All banding hardware for mounting to the pole, hardware to attach transformer

HD350 HD315

Heavy Duty Bracket

NEMA A LUGS

SINGLE PHASE— 3 thru 50 KVA Transformers

THREE PHASE— 15 and 30 KVA Transformers

No. 115

No. 215

No. 315

Catalog Number 115

Weight Lb. 27.5

Catalog Number †215

Weight Lb. 39

Catalog Number †315

Weight Lb. 50

Catalog Number HD315

Weight Lb. 65

Consists of 1 #5150

Consists of 1 #5250

Consists of 1 #5350

Consists of 1 #HD5350

Transformer Bracket and 1 #C2110009 Vertical Bracket

Transformer Bracket and 2 #C2110009 Vertical Bracket

Transformer Bracket and 3 #C2110009 Vertical Bracket

Transformer Bracket and 3 #C2110009 Vertical Bracket

†RUS listed

NEMA B LUGS

SINGLE PHASE— 75, 100 and 167 KVA Transformers

THREE PHASE— 45 and 75 KVA Transformers Will also mount Type A lugs, 12" spacing

No. PS150

No. PS250

No. 350

Catalog Number PS150 Consists of 2 #5150 Transformer Brackets

Weight Lb. 43

Catalog Number †PS250 Consists of 2 #5250 Transformer Brackets

Weight Lb. 64

Catalog Number †350 Consists of 2 #5350 Transformer Brackets

Weight Lb. 72

Catalog Number HD350

Weight Lb. 86

Consists of 2 #HD5350 Transformer Brackets

†RUS listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017