Machine Bolts & DA Bolts (5-53Supp24-28)

Bolts, Double-Arming All-Thread Rods NOTE:This page replaces information on Catalog Page 5-6, dated December 2008.

SUPPLEMENTAL CATALOG BULLETIN 5-53.27 December 2008

Referred to as “D.A. bolts,” double-arming bolts are used for double arm applications (one arm on each side of the pole) because of the ease of installation if replacement of the crossarm is necessary and offer flexibility of use. Hubbell Power Systems D.A. bolts are manufactured to HPS specifications that meet the requirements of ANSI C135.1. They are available in a range of thread diameters

and lengths. Each bolt includes four assembled square nuts. Threadsare formedwith the rolled threadprocess. Bolt length is measured from the last thread, end to end. Semi-cone point comes on bolts 8" and longer in 1 ⁄ 2 ", 5 ⁄ 8 " and 3 ⁄ 4 " diameters. All others have chamfered or rounded ends. For lengths not shown, contact HPS Customer Service.

1 ⁄ 2 " Thread Diameter (1/2-13 UNC) ANSI C135.1 Galvanized per ASTM A-153

7,800 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

16" 18"

1.17 lbs. 1.25 lbs.

8846 8848

5 ⁄ 8 " Thread Diameter (5/8-11 UNC)

12,400 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32"

1.26 lbs. 1.48 lbs. 1.70 lbs. 1.80 lbs. 1.97 lbs. 2.13 lbs. 2.27 lbs. 2.40 lbs. 2.53 lbs. 2.67 lbs. 2.80 lbs.

8862* 8864* 8866* 8868* 8870* 8872* 8874*

8876 8877 8878 8879

*RUS Listed: n - Bolt, double arming

For additional square nuts, see Catalog page 5-33

Continued on next page

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated Printed in USA ® ® POWER SYSTEMS, INC.