Killark Full Catalog

I NTRODUCT I ON CERTIFICATION MARKINGS

ATEX Marking for the EUROPEAN ECONOMIC AREA (EEA) When the ATEX assessment has been completed, the manufacturer can place the CE Mark and other information on the product and issue the DoC at time of shipment. The marking is placed either on the equipment, packaging or instructions (often used for very small parts). The letters must be vertically equal in dimensions and must not be smaller than 5 millimeters. If there are other Directives which cover the product as well, the CE marking must be affixed only when all the Directives have been met. it. Directives for a particular type of product such as electromagnetic compatibility (EMC) or electromagnetic interference (EMI). This mark is self declared by the manufacturer. The “Hex EX” mark identifies the equipment complies with all the applicable ATEX Directive. All equipment for use in explosive atmospheres, for use in the EU, include the CE and EX logos as well as the specific equipment marking. The CE mark indicates a specific product complies with all the applicable European Union (EU) directives that apply to

UKCA Marking for the UK (GB) The UKCA marking is identical to the CE marking with just the CE replaced by the

UKCA symbol. Currently. the UK will continue to follow the basic ATEX marking system, with the only differences being the Standards used are the BS EN IEC 60079 and BS EN 80079 Series. 2 G Ex eb IIC T5 Gb 2899 II UKCA Conformity (Meets all applicable UK ESHRs)

Meets ATEX directive(s) UK Notified Body Number Equipment Group j

Equipment Category of Use k Explosive atmosphere type (G = Gases, D = Dust) BS EN IEC 60079 Marking (Same as ATEX, IECEx, and CSA) j Equipment Groups • I = Mines Susceptible to Firedamp

• II = Surface Industries - Explosive Gas atmospheres • III = Surface Industries - Explosive Dust atmospheres k Equipment Category of Use

• 1 = Zone 0 • 2 = Zone 1 • 3 = Zone 2

Northern Ireland (UK) Marking Products produced in Northern Ireland intended for shipment to the UK would

Specific Equipment Marking

II

2 G Ex eb IIC T5 Gb

2899

follow the UKNI marking system. Therefore, the UKNI mark would simply replace the UKCA mark shown above.

EU Conformity (Meets all applicable EU ESHRs) Meets ATEX directive(s) Notified Body Number Equipment Group j

II

2 G Ex eb IIC T5 Gb

2899

UKNI Conformity (Meets all applicable UK ESHRs) Meets UK (EX) directive(s) UK Notified Body Number Equipment Group j

Equipment Category of Use k Explosive atmosphere type (G = Gases, D = Dust) IEC/EN 60079 Marking (Same as IECEx and CSA) j Equipment Groups • I = Mines Susceptible to Firedamp

Equipment Category of Use k Explosive atmosphere type (G = Gases, D = Dust) BS EN IEC 60079 Marking (Same as ATEX, IECEx, and CSA) j Equipment Groups • I = Mines Susceptible to Firedamp

• II = Surface Industries - Explosive Gas atmospheres • III = Surface Industries - Explosive Dust atmospheres k Equipment Category of Use

• 1 = Zone 0 • 2 = Zone 1 • 3 = Zone 2

• II = Surface Industries - Explosive Gas atmospheres • III = Surface Industries - Explosive Dust atmospheres k Equipment Category of Use

• 1 = Zone 0 • 2 = Zone 1 • 3 = Zone 2

www.hubbell.com/killark

H34