Hot Box Enclosures (CA07145E)
Options: Colors Standard Colors:
All standard Aluminum Enclosures come with a stucco embossed aluminum finish. No color code is required for the stucco embossed aluminum finish. If a mill finish is required, please specify by adding an "L" in the 12th digit of the part number. All fiberglass enclosures come standard with a beige gelcoat (color code not required). All plastic Poly EZ Box® Enclosures are available in beige (T) or dark green (G) only. Please add color code suffix. All fiberglass Hot Rok® Enclosures are available in brown (E), granite (N) only. Please add color code suffix. All plastic PolyRok® Enclosures are available in brown (E) or granite (N). Please add color code suffix. Optional Colors:
Options & Accessories
Beige Color code = T
Federal Brown Color code = M
Dark Green Color code = G
Black Color code = B
Brown “F/G Roks only” Color code = E
Granite “F/G Roks only” Color code = N
White (Sail) Color code = W
Grey Color code = C
Notes: If non-standard color is required, please specify the color code in the 12th digit of the part number. The above shown colors may not be an accurate representation of the actual color. If needed, please request a sample from your local Hot Box representative before ordering. Customer approval is required prior to processing the order. Custom colors not shown above will require a color sample, Federal Standard color, Munsell color or Sherwin Williams color number. Aluminum/Prep Procedure: Preparation of the exterior of the enclosure to accept paint involves sanding the aluminum and applying a solvent to remove dust and aluminum filings. A Mopoxy high build epoxy primer (Lead and Chromate free) is then applied to allow a Mothane Polyurethane enamel paint (Lead and Chromate free) to adhere properly. Prefinished aluminum sheets are used for the beige and federal brown colors.
Fiberglass Gelcoat: Any special gelcoat color will be applied at a thickness of 18 mils.
Made with FlippingBook - Online catalogs