Fiber Splice Closures (CA12027E)

Downlead Clamps

Key Features • Downlead clamp with urethane rubber halves secures cables to structure without damaging fiber • Clamp bodies designed for curved or flat surface mounting and accept up to 5/8” diameter bolt • Clamps available for cable diameters from 0.375”(9.5mm) to 1.200” (30.5mm) • Available as clamp blocks only, clamps blocks with mounting hardware, or mounting hardware sold separately

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Ordering Information

Carton Qty

Attachment Type

Catalog Number (Clamp Body Only Figure 1)

Cable Application Range In (MM)

Units Weight LBS (KG)

Decription

Suffix

PSCDLCU375500 .375-.500 (9.53-12.70) PSCDLCU500625 .500-.625 (12.70-15.88) PSCDLCU625750 .625-.750 (15.88-19.05) PSCDLCU750875 .750-.875 (19.05-22.23) PSCDLCU875100 .875-1.000 (22.23-25.40) PSCDLCU100120 1.000-1.200 (25.40-30.48)

Lag Bolt (Figure 2)

L

Stainless Steel Banding Mount (Figure 3)

S

10 4.375 (1.98)

Bolt Kit (Figure 4)

B

Tower Angle Mount (Figure 5)

T

Hardware Kits Sold Separately PSE4040212P

Lag Screw Kit (L) (Contents: 4” x 1/2” lag screw, round flat washer, and 2” x 2” square washer) Stainless Steel Banding Kit (S) (Contents: banding bracket, 5/8-11 x 3-1/2” bolt, 2” x 2” square washer, lockwasher, and hex nut) Tower Mounting Kit (T) (Contents: tower mount, 1/2-13 x 6” bolt, three lockwashers, two 2” x 2” square washers, and two hex nuts)

PSE4040213P

PSE4040214P

PSE4040215P

Bolt Kit (B) (Contents: 1/2-13 x 3” bolt, lockwasher, round flat washer, and hex nut)

13 | hubbellpowersystems.com