Electro Composites - Solid HV Bushings (EC-1)

P o s t I n s u l a t o r s

P o s t I n s u l a t o r s For outdoor use

Revised: October, 2008

Product Specification

Made from proprietary cycloaliphatic epoxy compounds with high mechanical and electrical properties Non tracking material Design based on ANSI C29.8 and C29.9 standards Standard steel zinc plated inserts (copper or brass inserts available upon request)

T202A T205A T208A

T210A

T010A

T010P

TR Post Insulators Conforms to ANSI C29.8 and C29.9

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 325 Scott Street, St-Jérôme, Québec, Canada J7Z 1H3 Tel.: 450.430.1181 Fax.: 450.433.1888 Email : info@eci-co.com . www.eci-co.com 4.3 9.5 T205A 110 254 (10) 607 (23.90) 7 3’’BC, 4x1/2-13 UNC 8.9 2000 37.8 8500 44.5 10000 791 7000 5.3 11.6 T208A 150 356 (14) 943 (37.13) 11 3’’BC, 4x1/2-13 UNC 8.9 2000 44.5 10000 44.5 10000 904 8000 7.3 15.9 T210A 200 457 (18) 1232 (48.50) 15 3’’BC, 4x1/2-13 UNC 8.9 2000 53.4 12000 66.7 15000 1130 10000 9.8 21.6 T010A 200 381 (15) 965 (38.00) 11 3’’BC, 4x1/2-13 UNC 8.9 2000 31.1 7000 66.7 15000 1130 10000 7.9 17.4 3’’BC, 4x1/2-13 UNC T010P 180 381 (15) 769 (30.3) 9 4 SLOTS BOTTOM 8.9 2000 31.1 7000 66.7 15000 1130 10000 7.7 17.0 Mechanical and Electrical values shown in table are ANSI minimum requirements. ECI meets or exceeds these values. Model Leakage distance Number of sheds Mounting Pattern Cantilever Strength Tensile Strength Compression Strength Weight Torsional Strength kV mm (in.) Height mm (in.) kN LBS kN LBS 31.1 7000 kN LBS 44.5 10000 N-m in-LBS kg LBS T202A 95 191 (7.5) 428 (16.85) 5 3’’BC, 4x1/2-13 UNC 8.9 2000 678 6000 BIL

11

© Copyright 2010 Hubbell Incorporated