EHV Substation Connectors (AEC-16)
SUBSTATION TEES
HUBBELL ® Power Systems
EHV TEE-TAPS COMPRESSION CABLE TO PAD-OPEN RUN AAC, ACAR AND ACSR CONDUCTOR
ALUMINUM ORT21
Aluminum compression tee connectors are designed for co- rona free service at 500 KV. Single cable diameter under 1.76 inch for 345 KV and 2.50 inch diameter for 500 KVmay not be corona free unless conductors are bundled. Hardware shields and hardware must be ordered separately. Contact sealant is recommended. Tapers and pad are coated with protective strippable plastic. Pad holes have NEMA spacing.
Material: Seamless Extruded Aluminum Alloy Tube P a d – Pure Cast Aluminum
Add suffix: “-HS” for one hardware shield, and “-HS2” for two hardware shields.
345 AND 500 KV LINE-TO-LINE APPLICATIONS
conductor range (1)
PAD DETAILS
length BEFORE COMPR. in (mm)
mini- mum
width in (mm)
net weight lb (kg) 3.1 (1.35) 3.3 (1.50)
catalog number ORT2112 ORT2112D
o.d. (in.)
aac size kcmil 795, 800, 874.5, 900, 954
acsr size kcmil (str)
BOLT HOLES
die size (2)
press (tons)
17.3 (439) 18.3 (465) 18.5 (470) 19.5 (495) 19.8 (503) 20.8 (528) 20.7 (526) 21.7 (551) 21.6 (549) 22.6 (574) 23.5 (597)
3.0 (76) 4.0 (102) 3.0 (76) 4.0 (102) 3.0 (76) 4.0 (102) 3.0 (76) 4.0 (102) 3.0 (76) 4.0 (102) 4.0 (102)
715.5 (24/7) (26/7) (30/19), 795 (24/7) (26/7) (45/7) (54/7), 795 (36/1), 900 (45/7)
1.026 - 1.131 (26.1 -28.7)
4
12CD 60
13CD or 30AH
4
1000, 1003.5
795 (30/19)
ORT2113 ORT2113D
3.6 (1.57) 3.8 (1.66)
1.140 - 1.235 (29.0 - 31.4)
60
4
1100, 1113 900 (54/7) 954 (45/7) (54/7), 1033.5 (36/1) (45/7)
13CD
954 (30/19), 1033.5 (54/7), 1113 (45/7) (54/19) , 1192.5 (45/7)
1192.5, 1200 1250, 1272, 1300 1351.5, 1400 1431, 1500 1510.5
ORT2114 ORT2114D
4.6 (2.00) 4.8 (2.09)
14CD or 34AH 60
1.236 - 1.330 (31.5 - 33.8)
4
1192.5 (54/19), 1272 (45/7) (54/19), 1351.5 (45/7) (54/19)
ORT2115 ORT2115D
5.5 (2.40) 5.7 (2.48)
15CD or 36AH 60
1.331 - 1.425 (33.9 - 38.2)
4
ORT2116 ORT2116D
6.1 (2.66) 6.3 (2.74)
16CD or 38AH 60
1.425 - 1.520 (36.3 - 38.6)
1590, 1600, 1700
1431 (45/7) (54/19), 1510.5 (45/7) (54/19), 1590 (45/7)
4
1590 (54/19), 1780 (84/19), 1869 (68/7)
17CD or 40AH 60 19CD or 44AH 100
1.521 - 1.615 (38.7 - 41.0)
1750, 1800, 1900 2000, 2250, 2300
4
ORT2117
7.8 (3.40)
2034.5 (72/7), 2057 (76/19) 2167 (72/7) 2156 (84/19), 2312 (76/19)
4 4
10.2 (4.43)
4.0 (102)
25.4 (645)
1.630 - 1.805 (41.4 - 45.8)
ORT2119
–
19CD
NOTES: (1) These tee taps are also approved application on AAAC and ACAR conductors within the diameter ranges listed. (2) Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown. (3) Install with Fargo type UJC or, for lowest resistance connection, type HTJC inhibitor compound.
36
™
Made with FlippingBook - Online catalogs