EHV Substation Connectors (AEC-16)

SUBSTATION TERMINALS EHV BIFURCATING TERMINALS ONE FLAT PAD TO TWO FLAT PADS TYPE EVT2F-D

HUBBELL ® Power Systems

ALUMINUM EVT2F-D

Aluminum alloy, bifurcating terminals are designed for two terminations to a single flat pad. The connectors are corona free at 500 KV. When mounted on unshielded equipment tongue, bolt shield (catalog number EVHS-D) must be used to assure corona free performance. Mounting hardware should not project above recess. Bolt shields are not included as part of this catalog number. Connector will be corona free only if tap connectors are attached. Maximum terminal pad thickness is one inch. Contact sealant is recommended. Add “-90” for tap pads in horizontal plane. Material: Castings – 356-T6 aluminum alloy Note: Contact factory to obtain center pad at special angles.

500KV LINE-TO-LINE APPLICATIONS

DIMENSIONS–INCHES (MM)

CATALOG NUMBER EVT2FD12

APPROX WT EA LBS (KG)

B

L

12 (304.80) 18 (457.20)

19 1/8 (485.78) 25 1/8 (638.18)

23.1 (10.49) 24.2 (10.99)

EVT2FD18

EHV TRIFURCATING TERMINAL ONE FLAT PAD TO THREE FLAT PADS TYPE EVT3F-D

ALUMINUM EVT3F-D

Aluminum alloy terminal is designed for corona free service at 500 KV. Hardware and terminals are not included and must be ordered separately. Maximum terminal pad thickness is one inch. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Contact sealant is recommended. Bolt shields not required on recessed pad connections. Material: Castings – 356-T6 aluminum alloy Weight – 25.5 (11.58)

21

™