Distribution Formed Wire (FW-1)
DOUBLE SUPPORT TIE FORMED WIRE INSULATOR TIE “J-NECK”
ALUMINUM ALLOY LDID2xxx
Double Support Ties are used in applications where the conductor is aligned to sit in the top groove of the insulator. This type of tie should not be used on line angles over 10 degrees with the insulator in a vertical orientation.
Fargo LDID series formed wire double support ties are designed for use with ACSR, AAC, AAAC, Compacted ACSR, Compacted AAC & AWAC ® .
J-Neck (3-1/2” neck diameter) interchangeable headstyle insulators.
Recommended for use with ANSI Class 55-6 Single Skirt Pin, 55-7 Single Skirt Pin & 56-1 Double Skirt Pin Insulators.
Note: Consult factory for informa tion on other applications. Right hand lay standard.
LDID2xxx
NOMINAL CONDUCTOR SIZE
DIAMETER RANGE PACKAGING PER BOX APPROX. APPLIED LENGTH MIN MAX UNITS WT LBS (KG)
CATALOG NUMBER
INSULATOR IDENT. MARK
CONDUCT. COLOR CODE
ACSR
AAC
AAAC
9/16”Minimum Groove Radius
#4 (6/1) #4 (7/1)
0.245 (6.23) 0.278 (7.06) 0.316 (8.03) 0.358 (9.09)
0.277 (7.05) 0.315 (8.00) 0.357 (9.08)
11 (5.0) 12 (5.4) 15 (6.8) 16 (7.3) 16 (7.7)
14 (356) 14 (356) 15 (381) 15 (381) 16 (406) 16 (406) 18 (457)
LDID2004
#3 (7W)
#4 (7W)
50
GREEN
ORANGE
LDID2003
#2 (7W)
#3 (7W)
50
GREEN
PURPLE
#2 (6/1) #2 (7/1) #1 (6/1)
#1 (7W) #1 (19W) 1/0 (7W) 1/0 (19W) 2/0 (7W) 2/0 (19W) 3/0 (7W) 3/0 (19W) 4/0 (7W) 4/0 (19W) 266.8 (7W) 266.8 (19W) 266.8 (37W) 336.4 (19W)
LDID2001
#2 (7W)
50
GREEN
RED
0.405 (10.30) 0.459 (11.66) 0.520 (13.21) 0.588 (14.95)
LDID2010
1/0 (6/1)
1/0 (7W)
50
GREEN
YELLOW
0.406 (10.31) 0.460 (11.68) 0.521 (13.23)
LDID2020
2/0 (6/1)
2/0 (7W)
50
GREEN
BLUE
25 (11.3) 25 (11.3)
LDID2030
3/0 (6/1)
3/0 (7W)
50
GREEN
ORANGE
LDID2040
4/0 (6/1)
4/0 (7W)
50
GREEN
RED
266.8 (18/1) 266.8 (26/7)
0.589 (14.96)
0.665 (16.89)
25 (11.3)
18 (457)
LDID2266
50
GREEN
PURPLE
NOTES: All dimensions: inches (mm) unless otherwise noted. AWAC is a registered trademark of Copperweld Co.
ANDERSON ™
HUBBELL ® POWER SYSTEMS FARGO ®
APRIL 2014
17
Made with FlippingBook - Online catalogs