Others (DI) - Distribution Connectors

SUSPENSION DUCTILE IRON GROUND WIRE SUPPORT BRACKET

DUCTILE IRON GWB1S

Designed to be used with most types of suspension clamps (alumi- num or ferrous). May be mounted with through bolt and lag screw.

Material: Body, Keeper, and Eyebolt – Bronze Alloy Eyestem – Bronze Alloy, Forged

Product Data & Conductor Size

MOUNTING HARDWARE MAX. DIA. INCHES (MM)

APPROX. WT. EACH LBS. (KG)

CATALOG NUMBER

MOUNTING BOLT SPACING INCHES (MM)

ULTIMATE STRENGTH VERTICAL LBS. (KN)

BOLT

LAG SCREWS

GWB1S

3/4 (19.05)

1/2 (12.70)

3-5/16 (84.14)

5,000 (22)

2.6 (1.18)

SUSPENSION DUCTILE IRON ANGLE CLAMP

Intended for use in angle construction with galvanized steel overhead ground wire or copper and Copperweld® phase wire. Magnetic induc- tion heating will occur.

DUCTILE IRON

Material:

Body and Keeper—ductile iron, galvanized Hardware—hot dip galvanized steel Cotter Pin—#302 stainless steel Grommet—neoprene

DI 22

Product Data & Conductor Size

MAX. TAKE-OFF ANGLE

ULTIMATE BODY STRENGTH LBS. (KN)

CLAMPING RANGE INCHES (MM) SMALL GROOVE LARGE GROOVE

CATALOG NUMBER 814602000 828602000

APPROX. WT. EACH LBS. (KG)

0

.162-.25 (4.11-6.35)

.25-.60 (6.35-15.24)

7,000 (31)

1.5 (.68)

60˚

NOTE: Recommended torque on 1/2” bolt—480 in. lbs.

ANDERSON ™

HUBBELL ® POWER SYSTEMS

FARGO ®

December 2014