General Use (DD) - Distribution Connectors

GENERAL USE VISE TYPE PARALLEL GROOVE BRONZE

BRONZE GC8000

• For copper to copper conductor -splice, loop deadend or service entrance taps

Material:

Castings – Copper Alloy Hardware – Stainless Steel Galvanized Steel Silicon Bronze

DD 17

Suffix Construction: “G” = Grommets – holds spacer during OH installs “L” = Inhibitor Applied @ Factory

Product Data & Conductor Size

*CONDUCTOR RANGE (AWG)

APPROX. DIMENSIONS INCHES

BOLT HEAD (HEX) 9/16 (14.32) 9/16 (14.32) 9/16 (14.32) 9/16 (14.32)

MAIN

MIN. SOL.

CATALOG NUMBER

A (MM)

B (MM) 1 1/4 (31.81)

C (MM)

BOLT SIZE 5/16 (7.95) 5/16 (7.95) 5/16 (7.95) 3/8 (9.54)

WT. LBS. (KG)

SOL.

STR.

1 3/8 (34.99) 1 1/2 (38.18) 1 3/4 (44.54) 2 3/8 (60.44)

7/8 (22.27) 1 (25.45) 1 1/8 (28.63) 1 1/2 (38.18)

.16 (.07) .24 (.11) .33 (.15) .62 (.28)

GC8002

2

3

8

1 3/8 (34.99) 1 3/8 (34.99) 1 1/2 (38.18)

GC8010

1/0

1

8

GC8020

3/0

2/0

8

GC8040**

4/0

4/0

6

*For Tin-plated Connectors add Suffix “P” to the Catalog Number desired. **RUS Listed Conductor Range Each size will close on two of the maximum size conductors, one minimum and one maximum size, or combinations in between. Hot Stick Installation

All connectors are available with flexible neoprene grommets to hold spacer bar in position so run and tap connectors may be installed with ease. Grommets posi- tioning spacer do not interfere with smooth operation of connector. If clamps are to be equipped with grommets, please specify by adding suffix “G” to the catalog number. Inhibitor Protected and Bagged Connectors are available with Factory installed Fargolene inhibitor and individually packaged. When ordering add the Suffix “L” to catalog number.

ANDERSON ™

HUBBELL ® POWER SYSTEMS

FARGO ®

December 2014