Distribution Connectors (Combined)

ALUMINUM GM100

DA-25

Bolted In-Span Neutral Taps Aluminum

Fargo in-span taps offer a wide range of neutral connections on open wire or multiple cable secondaries.

• A wide angle bell mouth opening permits tap offs up to 45° in either direction from the center line of the clamp. • Constructed of high strength aluminum alloy these clamps provide a minimum holding power of 1250 pounds. • Long contoured contact surfaces protect the neutral from the pull of the service. • Using less parts than conventional units, these taps are available for one, two or four service dead end connections. • Material: Body Casting – Aluminum Alloy Hardware – Stainless Steel

Note:

Add suffix “L” to catalog number for inhibitor protection and individual packs. Ex. – GM102AL

Product Data

RUN

TAP

APPROX. OVERALL DIMENSIONS INCHES

CATALOG NUMBER

NO. OF TAPS

LENGTH (MM)

MAX.

MIN.

MAX.

MIN.

WIDTH (MM) HEIGHT (MM)

3-3/8” (85.72)

1-1/2” (38.1)

2-3/4” (69.85)

GM102A

4/0 ACSR

1/0 ACSR

2 ACSR

6 ACSR

1

ALUMINUM MSNT

Aluminum Mid-Span Connector

For aluminum or ACSR triplex conductor. Has a double take-off loop. Bolts are peened to make nut captive.

Material:

Body – Top Member-Aluminum Alloy Bottom Member – Bronze Alloy-Tin Plated Hardware – Galvanized Steel

Product Data

CONDUCTOR RANGE (AWG)

DIMENSIONS INCHES (MM)

APPROX. WEIGHT LBS. (KG)

CATALOG NUMBER

NEUTRAL

PHASE

L

J

DIA.

4-11/16” (119.09)

3/8” (9.52)

7/8” (22.22)

.64 (.29)

MSNT2

1/0-4/0 ACSR

#6-1/0 AAC OR ACSR

800.346.3062 | hubbellpowersystems.com |