Distribution Connectors (Combined)

ALUMINUM GM128

In-Span Phase Connector And Housing

DA-24

This in-span phase connector is designed for use on open wire or multiple cable secondaries to permit aesthetic readily accessible service connections. The connector body is constructed of high strength aluminum for optimum corrosion resistance and light weight. The Fargo housing or case provides protective insulation from adjacent conductors and is formed for accessibility and ease of application. Secondary run and service tap openings are pre-cut for alignment and tap conductor insertion or removal. The connector locks in position inside the case providing one piece for assembly. For best performance, the connectors are supplied with inhibitor protected grooves and are individually packaged in plastic bags. The Fargo GM128AKL makes an insulated phase connector system for up to four service taps and may be used with the Fargo neutral span clamps.

Product Data

RANGE

APPROX. OVERALL DIMENSIONS INCHES

CATALOG NUMBER

WEIGHT LBS. (KG)

RUN

TAP

LENGTH (MM)

WIDTH (MM)

HEIGHT (MM)

GM128AL (Connector Only)

3-5/16” (84.03)

2-5/8” (66.81)

2” (50.90)

1.04 (.47)

2 Str. – 350 kcmil

4 Sol. – 3/0 Str.

GM128AKL (Connector and Housing)

3-13/16” (97.03)

3-1/4” (82.71)

3” (76.35)

1.20 (.54)

2 Str. – 350 kcmil

4 Sol. – 3/0 Str.

| hubbellpowersystems.com | 800.346.3062