Distribution Connectors (Combined)

Deadends Bolted Straight Line Spring-Loaded Side Opening Bronze

BRONZE BSOD

DA-19

For distribution and light transmission construction with copper or Copperweld® conductor. The vertical spring-loaded keeper provides the easiest installation of any current bolted strain clamp. Power loss, corrosion and heat rise are all reduced to a minimum due to the nonferrous construction

Material:

Body and Keeper – Bronze Alloy 112 Hardware – Galvanized Steel

Sockets and Clevises – Ductile Iron, Galvanized Cotter Pin and Spring Clip – Stainless Steel

Product Data

ULTIMATE BODY STRENGTH (LBS)

U-BOLTS

CLAMPING RANGE (IN)

DIMENSIONS (IN)

CATALOG NUMBER

COPPER

INCHES (MM)

NO.

SIZE

BODY SAG EYE

A

B

C

MIN MAX MIN MAX

3/8” (9.53)

#6 (7 STR)

2/0 (19 STR) 4/0 (19 STR) 350 (37 STR)

0.19 ” (4.83) 0.16 ” (4.06) 0.16 ” (4.06)

0.48 ” (12.19)

6,000 (26.69) 8,000 (35.58) 8,000 (35.58)

6,000 (26.69) 8,000 (35.58) 8,000 (35.58)

7.90 ” (200.66)

1 ” (25.4) 1 ” (25.4) 1 ” (25.4)

3.62 ” (91.95) 3.75 ” (95.25) 4.46 ” (113.28)

BSOD3981N

1

1/2 ” (12.70) 1/2 ” (12.70)

#6 (SOL)

0.57 ” (14.48) 0.69 ” (17.53)

8.62 ” (218.95)

BSOD5701N

1

#2 (7 STR)

9.00 ” (228.60)

BSOD6841N

1

NOTES: Rated slip strength as a percentage of conductor RBS varies with conductor type, size and stranding. Minimum slip strength rating on standard strength conductors is 40% RBS (Partial Tension per ANSI C119.4). Consult factory for slip strength test data on specific clamp and conductor combinations. Copperweld ® is a registered trademark of Fushi Copperweld Inc.

800.346.3062 | hubbellpowersystems.com |