Communications Catalog (CA12042E)

Clamps

SUPPORT CLAMP FOR ALL FIGURE 8 FACILITIES

AERIAL INSTALLATION

Made of high tensile aluminum. Designed to receive 1⁄2" or 5⁄8" standard through bolt.

Features

• Designed to fit many sizes of support strand used for Figure 8 duct or Figure 8 cable (strand sizes .109 – .148 and 3⁄16" – 1⁄4"). • Serpentine design prevents pull-through and allows cable or messenger-on-duct to be twisted when installed. • Two marked clamp grooves minimize insulation crushing. • Can be used on corners up to 30° with solid support members, and 20° with stranded. EM 0925 Figure 8 Support Clamp Standard packaging: 25/bx, 30 lb/bx. No minimum order. EM 0925.750 Version of above clamp with 13⁄16" middle hole for attaching 3⁄4" hardware FIGURE 8 CABLE OR DUCT-ON-STRAND SUPPORT CLAMP Ordering information

Two-bolt cast malleable iron clamp.

Features

• Supports strand sizes 5⁄16" (6M) – 3⁄8" (10M). • Can accept 5⁄8" center bolt. • Large load-bearing capability • Galvanized for long life

Ordering information

EM 0926 Cable or Duct-on-Strand Support Clamp

FIGURE 8 CABLE OR DUCT-ON-STRAND SUPPORT CLAMP

Support clamp that works with any jacketed strand from 1⁄4" to 3⁄8". Made from malleable iron with galvanizing. Two 5⁄8–16 x 2" bolts.

Ordering information

EM 0930 Cable or Duct-on-Strand Support Clamp

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page A71 | August 2022