Communications Catalog (CA12042E)

RPX® Suspension Clamp

AERIAL INSTALLATION

The Hubbell RPX suspension clamp is designed specifically for efficient aerial installation of Corning RPX cable in middle pole installations.

Material

• Aluminum

Benefits

UG-15

• Two-step installation for quick assembly • Profile of clamp designed to handle all sizes from 48f to 144f • Utilizes deviation angles of up to 20 degrees on both sides

Max. Span Length Span Differential Tension Differential

Initial Sag

Quantity

Catalog Number

Size Range

Deviation Angle

FT

M FT

M LBF

N

%

#

HUBRPXSUS 48f-144f up to 20°

262

80

98

30

150

667

1-3

10

For cable installation instructions, contact Corning Cable Systems. Span differential is the difference in span length on each side of the clamp. Tension differential is also known as unbalanced load. Recommended pole attachment hardware: PSC2080237 J-Hook.

J-HOOK BOLT FOR RPX AND ADSS SUSPENSIONS Designed especially for the suspension clamp with easy installation by captivating it onto the hook. The J-Hook offsets so that the suspension clamp cannot slide off if flipped upside-down in high winds. Includes 2” square washer and square nut for 5/8” thread.

Recommended pole attachment hardware: Hubbell Catalog No. PSC2080237

Page A129 | August 2022