CanadianConnectors (CA05041E )

Suspension Clamps— Aluminum Corona Free Clamp for High Temperature Cables (For Use with Armor Rods) Designed for use on extra-high voltage transmission lines. Corona and RIV are controlled through the design of the clamp, thus eliminating the need for control rings. Type CFSHT is designed for use on conductors operating at continuous temperatures up to 250 ° C. Armor rods or line guards required on conductors with continuous temperatures exceeding 200 ° C.

ALUMINUM CFSHT

7 / 8

”

5 / 8

”

2 1 / 2

”

2 1 / 16

”

Socket Type SA Socket Type SA

Clevis Type CA

J Hardware

C

Material: Clamp Body – high-temperature aluminum alloy Keeper – aluminum alloy Hardware – galvanized steel Socket – galvanized forged steel Cotter Pin – stainless steel Grommet – neoprene

B

Take Off Angle

Rubber Grommet to Retain U-Bolt

A

Product Data

Ultimate Strength lb (kN)

Approx Wt Each lb (kg)

Fitting

Dimensions Inches (mm)

Clamping Range Inches (mm)

Max Take- Off Angle (1)

Catalog Number

Type Cat No

A

B

C

PD

J

25,000 (111) 25,000 (111) 25,000 (111) 25,000 (111) 30,000 (133) 30,000 (133) 30,000 (133) 30,000 (133) 30,000 (133) 30,000 (133)

CFSHT120NBNKCVN CFSHT120SBNKCVN

None Socket

— SA10CVN

5.0 (2.27) 7.1 (3.22)

0.90-1.22 (22.86-30.99)

9.15 (232.4)

2.52 (64.0)

1.42 (36.07)

.62 (15.88)

.50 (12.70)

17.5°

CFSHT139NBNKCVN CFSHT139SBNKCVN

None Socket

— SA13CVN

5.6 (2.54) 7.6 (3.44)

1.18-1.39 (29.97-35.31)

9.45 (240.03)

3.00 (76.2)

1.63 (41.40)

.62 (15.88)

.50 (12.70)

17.5°

CFSHT182NBNKCVN CFSHT182SBNKCVN

None Socket

— SA16CVN

6.9 (3.13) 9.0 (4.08)

1.55-1.82 (39.37-46.23)

10.19 (258.83)

3.34 (84.84)

2.03 (51.56)

.62 (15.88)

.50 (12.70)

17.5°

CFSHT213NBNKCVN CFSHT213SBNKCVN

None Socket

— SA20CVN

8.9 (4.04) 10.7 (4.86)

1.80-2.13 (45.72-54.10)

11.75 (298.45)

3.62 (91.95)

2.39 (60.70)

.62 (15.88)

.50 (12.70)

17.5°

CFSHT252NBNKCVN CFSHT252SBNKCVN

None Socket

— SA24CVN

11.0 (5.0) 12.9 (5.86)

2.14-2.52 (54.36-64.01)

12.75 (323.85)

4.02 (102.1)

2.79 (70.87)

.62 (15.88)

.50 (12.70)

20°

NOTE: Recommended torque on U-bolts: 1/2” — 480 in-lb, 5/8 ” — 720 in - lb. (1) For larger angles, a special corona free angle clamp is available. For information on special clamps, contact factory.

In addition to industry standard markings for connectors, CFSHT suspension clamps are permanently marked with the IEC standard symbol for hot surface, allowing construction inspectors to easily verify that the installed clamps are high- temperature rated.

©2017 Hubbell Incorporated | hubbellpowersystems.com

B-5