Cable Accessories (C7)

15/25/28 kV FUSED ELBOWS

Hubbell Fused Elbows are designed for 15 kV or 25/28 kV applications. They combine a fully-shielded and insulated loadbreak elbow with full range current-limiting, non-expulsion fuse protection. The Hubbell Fused Elbow provides a quick and cost effective solution for adding fused reliability to underground distribution systems. When mated with a comparable loadbreak bushing, or other devices with an in terface that conforms to IEEE Std. 386, the Hubbell Fused Elbow provides a fully shielded and submersible connection. All Hubbell Fused Elbows are designed and tested to meet the require ments of IEEE Std. 386.

Accepts Cooper™ or Hi-Tech® fuses NOTE: All fuses sold separately.

SELECTION & ORDERING INFORMATION Determine the diameter over the cable’s insulation by finding it in the manufacturer’s catalog or by measuring it (do not measure over the extruded semi-con). Select an elbow size so that the insulation falls within the elbow’s range.

Determine manufacturer of fuse to be used.

Select a connector code that identifies the conductor size and stranding.

The elbow can be supplied with a separate, cold-shrink seal kit for jacketed concentric neutral cable, or it can be furnished with a separate adapter kit for copper tape shield cables.

Cable Dimension Reference

Components: 625SK52

Cold Shrink Cable Seal Kit for JCN cable with an overall diameter of 0.95” to 1.95”

625SK60 Tape Shield Adapter Range - 0.83” to 1.95” 200FEKITCx To order replacement hardware for installation of a Cooper ™ fuse, determine the connector code using chart on the next page 200FEKITHx To order replacement hardware for installation of a Hi-Tech ® fuse, determine the connector code using chart on the next page

C7 Page 24 | July 2023