CHANCE Lineman Grade Tools & Grounding Catalog (Combined)

C - 1250 - Load Handling Accessories

Kellems® Pulling Grips - K-Type Grips

Kellems® Rotating Eye, K-Type Pulling Grips are made of high strength galvanized steel strand. All Grips feature double weave mesh for greater strength and added mesh contact on the table, to handle longer or heavier pulling jobs. The forged eye mates easily with a swivel or shackle. An economical tool for pulling cable Safe, rugged and dependable Equipped with a rotating eye for spin out of pulling torque after load release Easily installed and removed • • • •

Approx. Breaking Strength

Catalog Number

Working Load Limit

Rotating Eye Dia.

Product Name

Cable Dia. Range

Dim. E

Dim. M

Kellems Wire Pulling Grips, Underground Rotating Eye, .75-.99 in, Standard

0.75 in - 0.99 in, 1.90 cm - 2.51 cm

6 in, 15.24 cm

32 in, 81.28 cm

03301024

9,600 lb.

1,920 lb.

1 in, 2.54 cm

Kellems Wire Pulling Grips, Underground Rotating Eye, 1.00-1.49 in, Standard

1.00 in - 1.49 in, 2.54 cm - 3.78 cm

7 in, 17.78 cm

33 in, 83.82 cm

1.37 in, 3.49 cm

03301025

16,400 lb.

3,280 lb.

Kellems Wire Pulling Grips, Underground Rotating Eye, 1.50-1.99 in, Standard

1.50 in - 1.99 in, 3.81 cm - 5.05 cm

7 in, 17.78 cm

34 in, 86.36 cm

1.37 in, 3.49 cm

03301026

16,400 lb.

3,280 lb.

Kellems Wire Pulling Grips, Underground Rotating Eye, 2.00-2.49 in, Standard

2.00 in - 2.49 in, 5.08 cm - 6.32 cm

9 in, 22.86 cm

36 in, 91.44 cm

1.62 in, 4.13 cm

03301027

27,200 lb.

5,440 lb.

Kellems Wire Pulling Grips, Underground Rotating Eye, 2.50-2.99 in, Standard

2.50 in - 2.99 in, 6.35 cm - 7.59 cm

10 in, 25.40 cm

38 in, 96.52 cm

1.87 in, 4.76 cm

03301028

33,000 lb.

6,600 lb.

Kellems Wire Pulling Grips, Underground Rotating Eye, 3.00-3.49 in, Standard

3.00 in - 3.49 in, 7.62 cm - 8.86 cm

10 in, 25.40 cm

39 in, 99.06 cm

1.87 in, 4.76 cm

03301029

41,000 lb.

8,200 lb.

Dimension E = Eye length Dimension M = Mesh length at nominal diameter WARNING: Never use wire mesh grips up to listed approximate breaking strength. Always use an appropriate safety factor when selecting grips for the working load in your application. Kellems minimum recommended factor of safety for pulling grips is five (5). Additionally, banding the tail end of the grip is recommended for maximum grip performance.

https://www.hubbell.com/hubbellpowersystems/en | 50