CHANCE Lineman Grade Tools & Grounding Catalog (Combined)

J - 2300 - Jumpers & Load Pick-Up Tools

Tension Puller Switching Tool

Creates a parallel circuit that permits a live overhead distribution line to be cut. Is easily installed and operated with hotsticks. Working Load Limit 4,000 lb. Maximum ratings: 35kV phase to phase, 600 amps continuous, 150kV BIL Weathershed skirts are bonded to the 1.5 in (38 mm) Epoxiglas pole A 1/2 in (13 mm) bypass stud is at each end of the switch and accepts clamps up to 3 in wide Rigid, H-frame copper switch blade opens to a standard 90°, or to 180° with stop pin removed Hooks are provided for use with a portable loadbreak device Hooks on ends do not swivel, and safety latch has spring-loaded gates that can rotate 135 degrees both ways A Portable Loadbreak Tool must always be used when opening the switch on energized systems • • • • • • • •

Catalog Number

Product Name

Weight

C4001907

Tension Puller Switching Tool 35 kV, 58-70 in (1,473-1,778 mm) Range

29.0 lb., 13.1 kg

205 | https://www.hubbell.com/hubbellpowersystems/en