Bonding and Grounding - Communication (CA12005E)

BBonds

B BOND CLAMPS – DOUBLE STUD

Features

• Tin-plated bronze and copper construction for high conductivity • 3⁄8" nuts fit standard terminal wrench. • Piercings in bottom plate penetrate Mylar lining on inner surface of shield. • Can be used with or without punching holes in sheath • When cable shield is tabbed and punched, one size works on all cables. • Two studs prevent loosening of connections due to counterclockwise movement of bond strap. • Two studs offer lower resistance and higher current carrying capacity. This enables use of a smaller size shield connector. • Two studs offer higher pullout strength.

See page G140 for the double hole punch to go with these double stud B bonds.

Locknuts

Bond strap

Bond strap

Locknuts

GROUNDING

BONDING &

Ordering information

Ordering information

Double stud with single nut per stud EM-1BBM – up to .5" cable

Double stud with double nut per stud EM-2BBM – up to .5" cable

EM-1BB1 – .5"–.8" cable EM-1BB2 – .8"–1.6" cable EM-1BB3 – 1.6"–up

EM-2BB1 – .5"–.8" cable EM-2BB2 – .8"–1.6" cable EM-2BB3 – 1.6"–up

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G95 | August 2022