Bonding and Grounding - Communication (CA12005E)

UndergroundHardware

CABLE RACK BOND CLAMPS

A mechanically galvanized steel clamp assembly.

Application

For use when bonding cable racks to a ground point common with other hardware to aid in corrosion prevention.

Features

• For use with all standard cable racks • Works with a variety of conductors, i.e., solid or stranded #6AWG, bonding ribbons, and round or flat braid • Eliminates “sandwiching” the conductor between two flatwashers • Can be used with one conductor, or to connect two conductors • Easily installed by hanging the clamp in a hook hole, inserting the conductor(s) and tightening • Mechanically zinc plated for corrosion resistance

EM-3777

Ordering information :

EM-3777 – for bonding ribbon or #6 AWG wire to cable racking Standard packaging: 10/bg, 100/bx, 19 lb/bx

LISTED 84D8

EM-3778 – for #1 & #2 AWG wire Standard packaging: 100/bx, 25 lb/bx

GROUNDING

BONDING &

EM-3779 – for Unistrut P16F cable entrance facilities, #1 & #2 AWG wire Standard packaging: 100/bx, 18 lb/bx

LISTED 84D8

EM-3779-1 – f or Unistrut P21H cable entrance facilities, 2-1⁄4" and 1-3⁄4"; flat back plate, with extra tang to keep back plate from slipping out of place Standard packaging: 100/bx, 18 lb/bx

LISTED 84D8

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G93 | August 2022