Bonding and Grounding - Communication (CA12005E)

Ground Rod Clamps

TWO-BOLT GROUND ROD CLAMPS FOR GROUND RINGS Heavy-duty cast silicon bronze body, headed silicon bronze clamping bolts, and nylon locking collars.

Applications • Ground rings for equipment huts • Any installation where added security of double bolts is necessary • 5⁄8" ground rods

Features • Can accept ground wires from #10–1/0 AWG • Available with a front “J” slot to accept #1, #2, or #6 AWG in a continuous “ring” around an equipment hut or building • Available with pre-set torque shear heads for a pre-determined installation torque and to prevent vandalism • Nylon locking collar prevents inadvertent loosening of bolts • Uncomplicated design, craftfriendly, low-cost product

EM-2301-01

Ordering information

EM-2301-01 – 5⁄8" ground rod clamp, two-bolt type with “J” slot, torque shear heads (150 inch/lbs.), nylon lock collars. Connects #1, #2, or #6 AWG in the “J” slot. Standard packaging: 5/bg, 25/bx, 14 lb/bx.

C

US

LISTED 84D8

GROUNDING

BONDING &

EM-2301-01NB – Same as above, with no torque shear heads.

EM-2301.75 – Same as EM-2301-01, but accommodates 3⁄4" ground rod.

At a glance . . .

PART NUMBER

GROUND ROD

WIRE SIZE

DISTINGUISHING FEATURES

LISTINGS

EM-2301-01

#1, 2, 6

5⁄8"

Torque shear heads

cULus, CSA

EM-2301-01NB

#1, 2, 6

5⁄8"

None

CSA

EM-2301.75

#12–1/0

3⁄4"

Torque shear heads

CSA

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G79 | August 2022