Bonding and Grounding - Communication (CA12005E)

Clamps –BronzeVise Type Connectors

BRONZE VISE TYPE CONNECTORS Silicon bronze clamps adjustable by single hex head screws, used to connect various size grounding conductors, as well as pole line apparatus to grounding conductors. FEATURES • Casting and bolt are both made of silicon bronze for greater strength, conductivity, and corrosion resistance. • Install using the standard can wrench. Ordering information EM-2370 is manufactured to Bell Spec CA08980 (H1). It accommodates: • Single or multiple #6 AWG wires solid or stranded • #6 AWG to #10 or #12 AWG • From single 2-pair BSW metallic shield, to three 2-pair BSW metallic shields Standard packaging: 100/bx, 8 lb/bx. EM-2370NS Same as above, with no slot.

H1

RUS Listed

Ordering information EM-2371 Silicon Bronze Clamp

LISTED 84D8

Standard packaging: 5/bg, 100/bx, 10 lb/bx. EM-2371-2 Silicon Bronze Clamp with a vibration- resistant screw Standard packaging: 5/bg, 100/bx, 9 lb/bx.

EM-2371 is similar to the EM-2370, only with the addition of “tongue and groove” type alignment channels to keep the two halves of the clamp in proper alignment with each other.

Add suffix -T for a tin-plated clamp. Add suffix -BA for a torque shear head.

EM-2371 with torque shear head bolt

Accommodates: • #12–#4 AWG solid • #1/0 B, C, or D stranded copper to #6, #8, #10, #12 AWG solid bare copper wire • 6.6–10M support strand to #6, #8, #10, #12 AWG solid bare copper wire

H2

GROUNDING

BONDING &

Ordering information EM-2372 H2 Silicon Bronze Clamp.

Standard packaging: 5/bg, 100/bx, 15lb/bx.

LISTED 84D8

EM-2372-2 H2 Silicon Bronze Clamp with a vibration- resistant screw EM-2372-BA02 H2 Silicon Bronze Clamp with a vibration-resistant screw and torque shear head

Add suffix -T for a tin-plated clamp.

EM-2372-BA02

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G63 | August 2022