Bonding and Grounding - Communication (CA12005E)

Connectors –Pedestal Ground Brackets

PEDESTAL GROUND BRACKET STUD EXTENDER This can be used when the existing ground bracket studs are full. Simply remove the existing nut, thread on the stud extender (see picture, right). This gives 3⁄4" additional stud length. The nut that was removed is now used to capture the bonds on the stud extender.

Ordering Information EM-63MG-SS – Stainless steel EM-63MG-TB – Tinned brass EM-63MG-TSB – Tinned silicon bronze

"C" SERVICE WIRE CLAMP Buried service wire connector for pedestal applications. Attaches to the ground brackets on opposite page.

Ordering Information EM-6250 Standard packaging: 10/bg, 100/bx, 7 lb/bx. HARDWARE

PEDESTAL GROUND BRACKET EXTENDERS

Stainless steel nut, carriage bolt, and lock washer used to attach pedestal ground brackets (opposite page) to pedestal.

Ordering Information EM-63NBL

EM-6300-EXT-KIT

EM-6300-EXT

BONDING &

GROUNDING

Ordering Information EM-6300-EXT – Stainless steel plate with 6 short studs staked into it; also 6 Keps nuts. EM-6300-EXT-KIT – Stainless steel plate with 6 short studs staked into it, and 2 extra mounting studs; also 8 Keps nuts.

1⁄4-20 x 1⁄2 hex head cap screw with nut and lockwasher, for attaching cast ground lug to ground bracket.

Ordering Information EM-63SS – Stainless steel EM-63BR – Brass/bronze EM-63TBR – Tinned brass bronze

Add suffix -TC for a tinned copper bracket extender (studs and nuts still stainless steel).

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G36 | August 2022