Bonding and Grounding - Communication (CA12005E)

Bonding&Grounding Straps, Harnesses &Braid GROUNDING HARNESSES (CONTINUED)

EM-GH-18 Grounding Harness

(former Siecor # 27-025-14) The EM-GH-18 grounding harness is designed to interconnect the ground stud of a shield bonding connector, installed on buried cable, to the spring action type

grounding contacts employed in buried plant housings. The harness consists of a tinned ring terminal, crimped to one end of a green PVC insulated #14 AWG stranded tinned copper wire, and a tinned spring action contact, crimped to the opposite end. Overall length is 15 inches.

Ordering Information EM-GH-18 Standard packaging: 25 units per bag, shipping weight 12 oz. approx.

EM-GH-19 Grounding Harness

(former Siecor # 27-026-14) TThe EM-GH-19 grounding harness is designed to interconnect the ground stud of a shield bonding connector, installed on buried cable, to the spring action type

grounding contacts employed in buried plant housings. The harness consists of a tinned ring terminal, crimped to one end of a green PVC insulated #14 AWG stranded tinned copper wire, and a tinned spring action contact, crimped to the opposite end. Overall length is 36 inches.

Ordering Information EM-GH-19 Standard packaging: 25 units per bag, shipping weight 24 oz. approx.

EM-GH-20 Grounding Harness

(former Siecor # 27-027-14) The EM-GH-20 grounding harness is designed to interconnect and ground the of spliced cables, employing shield bonding connectors with studs, to grounding studs. The harness consists of two lengths of green PVC

shields

common

insulated #14 AWG stranded tinned copper wire, joined together with a tinned spade terminal. A tinned ring terminal is crimped to the opposite end of each wire. Overall length of each wire is 21 inches.

Ordering Information EM-GH-20 Standard packaging: 25 units per bag, shipping weight 2 lb. approx.

GROUNDING

BONDING &

EM-GHT-1 Compression Tool

(former Siecor # 27-001-15)

The EM-GHT-1 compression tool is designed to insure a high degree of reliability in making the ground harness to shield bond for harnesses employing TERMI-FOIL® type connectors. The EM-GHT-1 is equipped with a special ratchet which controls, and assures, correct pressure at the shield bond before the tool will release.

Ordering Information EM-GHT-1 Standard packaging: one tool per box, shipping weight 21 oz. approx.

*TERMI-FOIL® is a registered trademark of TE Connectivity.

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G29 | August 2022