Bonding and Grounding - Communication (CA12005E)

Miscellaneous SHIELD CONNECTOR FOR CAT 5 CABLES The EM-9556BW S(.218) C(.31) is a small cable shield connector that can be installed on a small cable that is already placed. The take-apart design fits around cables proximately .3–.45 diameter, but each diameter or style of cable should be submitted to the factory. After basic installation (1), insulation displacement screws are run down (2) to contact the shield with no loss or attenuation. Connector can be used for both bonding and grounding or locating. No need to open sheath and shield. Comes as a standard with 36"-long #10 AWG green lead.

Insulation displacement screws

Ordering information

EM-9556-BW S(.218) C(.31) – Small cable shield connector

2. Insulation displacement screws, torque shear heads broken off

1. Basic installation

3/4"

DOUBLE-HOLE GROUND LUGS Accommodate #6–#2 AWG ground wires, solid or stranded.

3/4"

EM-6631

EM-6630

1-1/4"

3/4"

Ordering information

BONDING &

GROUNDING

EM-6630 Double-Hole Ground Lug EM-6631 Double-Hole Ground Bar Lug with parallel mounting tang

3/4"

1-1/4"

2-1/4"

C

US

LISTED 84D8

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G160 | August 2022