BURNDY Master Catalog (20190422)

Underground

Replaceable Link MOLIMITER™ Type LYM Replaceable Link MOLIMITER™, Type LYM With Ceramic Shell and Rubber Sleeve for Insulated Cables The Replaceable Link MOLIMITER™ is used to fuse underground cables at junction points with the BURNDY ® MOLE. The “Replaceable Link” feature permits the selection of one of several links. In addition, the replacement of links that have burned clear is both rapid and inexpensive. For use with both rubber and paper insulated cables. The MOLE™ end of the MOLIMITER™ is installed in the MOLE™ Socket and Nut Assembly, while the cable socket end is HYPRESS™ installed, see table below for proper installation.

For Connection to MOLE™ Use

Installation Information

** (Max. Cable Dia. Over Insul. Inches) A

* Link Supplied

Num- ber of

Socket & Nut Assembly

Catalog Number

Cable Size

Indents in Cable Socket

Z Cone

Installation Die Index Number

No. of Indents

Ampere Capacity

Catalog Number

Catalog Number

Catalog Number

LYM2CC LYM1CC LYM25C LYM26C LYM27C LYM28C LYM29C LYM30C LYM31C LYM32C LYM34C

LF1014 LF1014 LF1025 LF1025 LF2019 LF2027 LF2027 LF2038 LF2038 LF2065 LF2065

2 Str. 1 Str.

97 98 99

100A

0.75

1/0 Str. 2/0 Str. 3/0 Str. 4/0 Str.

150A

Z28NR Z2828

1

1

100 101

200A

1.00

15 16 17 18 19

250A

250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil

Z29NR Z2929 Z30NR Z3030 Z32NR Z3132 Z32NR Z3232 Z34NR Z3434

300A

1.25

2

2

400A

20 * Fuse link supplied is selected on the basis of a minimum blowing current of approximately twice the NEC rubber insulated cable rating. Refer to Time Current curves shown and specify if another size is desired. ** The standard end bushing supplied is for maximum cable insulation diameters as shown. Compact cable will require a bushing with a smaller inside diameter to accommodate the smaller insulation diameter of the cable. If other than standard bushing is required, contact customer service.

1-800-387-6487 (Canada) 1-603-647-5299 (International)

K-55